Overview
The Baer Brakes 4262197S is a silver rear Pro Plus disc brake system for Ford 9 inch rear axles with Torino (late big) bearing housing ends and a 5×5.00 inch bolt pattern. It combines a six-piston fixed caliper with a 14 inch two-piece rotor, and Baer builds the backing plate to mount the caliper while also housing a one-piece park brake shoe assembly.
Baer aims the Pro Plus 14 inch system at drivers running most wheels 18 inch or larger, and says its brake systems cannot be guaranteed to fit every wheel style. The template for this kit, Q082P, is the tool to compare against your wheel before you commit. Fitment is covered in the section below.
Key features
- Six-piston fixed caliper with staggered pistons that help reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals guard against dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor on a billet aluminum hat
- Backing plate serves as the caliper mount and houses the park brake shoe assembly
- Stainless braided brake hoses and hardware included
- CNC machined components made from forged or billet aluminum, with a powder coated finish
- Pad type D0731, a common FMSI pad number
Before you buy
A rear Pro Plus kit replaces the rear rotor, caliper and park brake assembly together, so the decision usually starts with the axle and the wheel. Measure the clearance between the wheel and the caliper body before ordering, and confirm the bearing housing ends match the axle you own. Owners who move to a larger rotor often refit the rear brake lines as well, since caliper position and hose routing change together.
Pads and rotors wear at different rates on a rear axle, so check both at each service. A rotor worn below its minimum thickness or showing deep grooves should be replaced with the pads rather than run alone. The park brake shoe inside the backing plate also wears, and a shoe that drags or no longer holds should be inspected before a trail trip.
- Check wheel clearance against the caliper body
- Replace pads and rotor together when wear is uneven
- Inspect braided hoses for chafing at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262197S |
| UPC | 844165037217 |
| Caliper | 6-piston (6P), fixed, silver |
| Pad type (FMSI) | D0731 |
| Rotor type | 2-piece, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5 lug, 5×5.00 inch |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Park brake | Included (one-piece shoe assembly in backing plate) |
| Park brake cables | Not included |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits Ford 9 inch rear axles with Torino (late big) bearing housing ends and a 5×5.00 inch bolt pattern, with a minimum wheel diameter of 18.0 inch. Confirm fit for your vehicle’s year, model and trim before ordering.
This kit is built for the Torino bearing housing ends, so it is not intended for other rear axle flanges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so the integrated park brake shoe assembly needs a cable set sourced separately. The rotor arrives pre-assembled with NAS stainless hardware, and the braided hoses are supplied. Because the caliper mounts to the backing plate, rear brake work is best left to someone familiar with Baer’s Pro Plus design.
What’s included
The kit includes the six-piston caliper, the pre-assembled two-piece rotor with stainless hardware, the backing plate with its park brake shoe assembly, and stainless braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















