Overview
The Baer Brakes 4261379B is a black S4 front brake kit for early-1970s Ford and Mercury cars that previously ran drum brakes at the front. It uses an 11-inch two-piece slotted and drilled rotor with a four-piston S4 caliper, and it covers the Ford Falcon, Fairlane, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
Each hub comes assembled with premium bearings packed in Redline synthetic grease and fitted with billet dust caps. The rotors arrive pre-assembled with NAS high grade stainless hardware, and the mounting brackets, braided hoses and hardware are in the same kit, so the front end is covered by one package.
Key features
- Black-finish four-piston S4 caliper, powder coated
- 11-inch two-piece rotor that is slotted, drilled and zinc plated, with iron construction and an aluminum hat
- Hubs machined from billet aluminum, with bearings and dust caps included
- Hard anodized aluminum pistons, stainless steel abutments and noise suppression clips
- Dual dust, weather and pressure seals
- DR1 or HB100 pad options
- Steel braided hoses, DOT approved
- CNC machined from US sourced forged or billet aluminum, made in Phoenix, AZ
Pad choice and rotor wear
Pad compound affects bite, fade and rotor wear. Choose a compound that suits how the car is driven, whether that means mostly street use or harder driving. Matching the pad to the driving is more useful than choosing by appearance alone.
Bed in new pads and rotors with a series of moderate stops before any hard braking. This lays an even layer of friction material onto the rotor and helps prevent pulsing. Avoid heavy braking until the pads are fully seated.
Inspect rotor surfaces for heat cracks, deep scoring and uneven wear at each service. Rotors worn below their minimum thickness should be replaced, and pads should be changed before the backing plate contacts the rotor.
- Check pad thickness at every wheel removal
- Bed in new pads before hard stops
- Replace rotors showing deep scoring or heat cracks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261379B |
| UPC | 844165035008 |
| Caliper | S4, four-piston, fixed, black |
| Rotor diameter | 11.0 inch |
| Rotor construction | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Lug count and bolt pattern | 5 lug, 5×4.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 15.0 inch |
| Pad type | DR1 (FMSI) |
| Hose material | Steel braided, DOT approved |
| Template | S162A |
| Axle | Front |
| Grade | Performance |
| Country of origin | US |
| Sold as | Kit |
Vehicle fitment
The listed vehicles are the 1970 Mercury Cyclone, 1970 Ford Fairlane and Falcon, 1970 to 1974 Ford Maverick, 1970 to 1973 Ford Mustang and Mercury Cougar, 1970 to 1971 Ford Torino and Mercury Montego, and 1971 to 1974 Mercury Comet. The fitment notes state these are for cars with OE drum brake spindles.
Cars with factory disc brake spindles fall outside this fitment, as do model years beyond the ones listed. Wheel fit is not guaranteed by Baer, so check template S162A against your wheels. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors and hubs arrive assembled. Check wheel clearance with template S162A and confirm the wheel is at least 15.0 inch in diameter before mounting. Lug nuts are not in the box. Given the stopping role of this system, a brake specialist should handle the mounting and bleeding.
What’s included
The package contains front S4 calipers, two-piece 11-inch rotors, billet hubs with bearings and dust caps, mounting brackets, braided hoses and hardware.
Not included: lug nuts.














