Overview
The Baer Brakes SS4 Plus 4262255S is a silver rear brake system kit for Ford 8 Inch/9 Inch small bearing housing ends. It is built around a 13.0 inch two-piece slotted and drilled rotor with a billet aluminum hat, a four-piston S4 caliper in a fixed design, and a backing plate that carries a one-piece park brake shoe assembly. The wheel side is 5 lug on a 5×4.50/5×4.75 bolt pattern.
Rotors come pre-assembled with NAS high grade stainless hardware, and stainless braided hoses and hardware are supplied. The listed minimum wheel diameter is 17.0 inch, which makes this a kit for larger wheels. The rotor thickness is 0.81 and the template is S135H.
Key features
- Four-piston S4 caliper, CNC machined from US sourced forged or billet aluminum
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat
- Pre-assembled NAS high grade stainless hardware on the rotor
- Hard anodized aluminum pistons with stainless steel abutments
- Dual seals against dust, weather and pressure
- Backing plate with a one-piece park brake shoe assembly
- Powder coated silver finish with stainless braided hoses
Hub and rotor maintenance
A two-piece rotor separates the friction ring from the hat, so the attachment hardware carries the braking torque and deserves regular checks. Look for loose fasteners, gaps between the ring and hat, and any movement when the rotor is turned by hand. Hat and ring parts should always be serviced as a matched unit.
Heat cycling and hard use can cause checking on the friction face, and a rotor with deep grooves will wear new pads quickly. Lateral runout and uneven thickness show up as pedal pulsation at speed, so measure before reuse. Keep the wheel bearing and hub face clean and flat before the rotor goes on, since dirt or rust there shifts the rotor off true.
- Torque hardware to the setting in the service manual
- Re-check fasteners after the first few drives
- Replace the rotor when it falls below minimum thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262255S |
| UPC | 844165027997 |
| Sold as | Kit |
| Caliper | S4, four-piston |
| Caliper color | Silver |
| Caliper type | Fixed |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 0.81 |
| Rotor surface | Slotted, drilled and zinc plated |
| Axle flange | Ford 8 Inch/9 Inch small bearing housing ends |
| Wheel lug count | 5 Lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 17.0 inch |
| Hose material | Steel braided |
| Park brake | Yes, shoe assembly in backing plate; cables not included |
| Pad FMSI number | DR1-C |
| Template | S135H |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
The housing ends are Ford 8 Inch/9 Inch small bearing types. Confirm the housing type on your axle and the vehicles that use it before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The two-piece rotor arrives with its hardware pre-assembled, so the hat and rotor install as one unit. Park brake cables are not included, so the parking brake needs cables from another source. Baer advises comparing the S135H template with the chosen wheel, since it cannot guarantee fit with every wheel style. Hydraulic work should be completed by a qualified technician.
What’s included
The kit includes the S4 caliper, the 13.0 inch two-piece rotor with billet aluminum hat, the backing plate with park brake shoe assembly, stainless braided hoses and hardware.
Not included: park brake cables, front rotor and lug nuts.















