Overview
The Baer Brakes Extreme Plus red front brake system, part number 4301391R, combines a 14-inch two-piece rotor with a one-piece monoblock six-piston caliper for 2WD half-ton Chevrolet and GMC trucks, including the C10 and C15 series, from 1960 through 1989. It is intended for six-lug trucks with a 6 x 5.50 inch bolt pattern.
Built around CPP nodular iron 2.5-inch drop spindles, which are not part of the box. The red powder coated caliper uses stainless pistons with staggered placement to help even pad wear. The minimum wheel diameter is 18.0 inch, and fit with every wheel style is not guaranteed.
Key features
- Six-piston monoblock 6S caliper built in Phoenix, Arizona
- Caliper machined on CNC equipment from 2618 aluminum forging of U.S. origin
- Red powder coated finish
- Stainless pistons, abutments and noise clips
- Dual seals rated for dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat
- Rotor pre-assembled with NAS high grade stainless hardware
- Billet hubs with premium bearings packed with Redline synthetic grease
Pad and rotor pairing
Brake pads and rotors wear as a pair, and a new rotor on worn pads can glaze quickly. When the pads are changed, the rotor surface should be cleaned of grease and dust before the new pads seat. Slotted and drilled faces help clear debris, but they do not replace a proper bed-in procedure.
Red calipers are often chosen for appearance, but the caliper body still needs the same care as any other. Keep the piston boots clean, and check the bleeder screws for corrosion whenever the wheels come off. Bring the pad part number to the parts counter so the friction material matches the rotor.
- Bed in new pads with several moderate stops
- Clean rotor faces of brake cleaner residue
- Inspect caliper slides for corrosion at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301391R |
| UPC | 844165041023 |
| Caliper | 6S, one-piece monoblock, six-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | Two-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI number | D1247 |
| Drive | 2WD |
| Axle | Front |
| Lug count | 6 |
| Wheel bolt pattern | 6 x 5.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Spindle type | CPP nodular iron 2.5-inch drop spindle |
| Spindles included | No |
| Lug nuts included | No |
| Template | N117P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The kit fits Chevrolet C10 pickups from 1960 to 1986, C10 Suburbans from 1967 to 1986, Suburbans from 1960 to 1966 and 1987 to 1989, GMC 1000 pickups in 1966, GMC 1000 Series trucks from 1960 to 1965, GMC C15 trucks from 1975 to 1978 and 1967 to 1974, and GMC C1500 trucks from 1979 to 1986.
Four-wheel-drive models and Chevrolet C10 pickups after 1986 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan to use the separately supplied CPP nodular iron 2.5-inch drop spindles that this kit is built around. Lug nuts are not included with the red kit, so supply six nuts that suit a 1/2-20 stud. The rotors arrive with NAS stainless hardware installed, and the N117P template is the reference for checking wheel clearance.
What’s included
The package has the front rotor, the 6S caliper, billet aluminum hubs with bearings and dust caps, mounting brackets, stainless braided hoses and the hardware for them.
Not included: the drop spindles and lug nuts.














