Overview
The Baer Brakes 4401006CY is a Pro Plus front brake kit in Comp Yellow for the 2018–2025 Jeep Wrangler JL and 2020–2025 Jeep Gladiator JT, built for vehicles fitted with original-equipment spindles and hubs. It pairs a six-piston fixed caliper with a 14-inch, two-piece vented rotor in one matched front package.
The caliper is powder coated in Comp Yellow and uses stainless steel pistons, abutments and noise suppression clips. It is manufactured in Phoenix, Arizona. The rotor carries a billet aluminum hat and comes pre-assembled with NAS high grade stainless hardware, so it is ready to mount.
Key features
- Six-piston fixed caliper in Comp Yellow powder coat
- Staggered pistons intended to minimize uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Two-piece slotted, drilled and zinc-plated rotor on a billet aluminum hat
- Caliper body CNC machined from US-sourced forged or billet aluminum
- Its dust and weather seals are T compliant, paired with D0731 pads.
Before you buy
A front brake kit changes how the whole front end behaves, so it helps to plan the job before ordering. Start by confirming the spindles and hubs on your vehicle are original equipment, then check wheel clearance against the template and the minimum wheel diameter. Larger calipers and rotors often need a wheel with enough room behind the spokes, and a different tire size can change that clearance.
Brake pads, hoses and fluid are commonly replaced in the same job. Fresh pads should be bedded in gradually so an even friction layer forms on the rotor, and the fluid should be checked for moisture if the system has been closed for a long time. Bleed the new caliper fully so no air remains in the line.
- Confirm spindle and hub type before ordering
- Measure wheel clearance against the template
- Plan new brake hoses and fluid for the same job
- Bed in pads gradually after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4401006CY |
| UPC | 90127943359 |
| Sold as | Kit |
| Position | Front |
| Caliper | 6-piston (6P), fixed, Comp Yellow |
| Rotor type | Two-piece, vented |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness (in) | 1.15 |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Pad FMSI number | D0731 |
| Template | Q082P |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Brake hoses | Not included |
Vehicle fitment
It fits the 2018–2025 Jeep Wrangler JL, the 2020–2025 Jeep Gladiator JT and a 2018 Jeep Wrangler JK. The application is Jeep Wrangler 18-25 and Jeep Gladiator 20-25, and original-equipment spindles and hubs are required.
Does not cover the 2007–2017 Jeep Wrangler (JK) or earlier Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake hoses are not supplied, so line up a compatible set before starting the job. Check the Q082P template against your wheel, since Baer cannot guarantee wheel fit across every wheel style. Brake work changes stopping behavior, so test the pedal under controlled conditions before regular driving.
What’s included
The kit includes the six-piston caliper, the two-piece rotor with its pre-assembled hat and NAS stainless hardware, and all mounting brackets and hardware.
Not included: brake hoses.
