Overview
The Baer Brakes Pro Plus 14.0 inch rear brake system, part number 4262151HO, is a rear disc brake kit for Ford 9 inch rear ends with early big bearing housing ends. Six-piston 6P fixed calipers in Hugger Orange clamp two-piece slotted, drilled, zinc-plated rotors.
Baer’s backing plate doubles as the caliper mount and holds a one-piece park brake shoe. Pads are the D0731 type, and the calipers have stainless pistons and dual dust and weather seals. The bolt pattern is 5×4.50/5×4.75, with 5 lug nuts.
Key features
- Six-piston 6P caliper with staggered pistons, which helps even out pad wear
- Stainless steel pistons paired with stainless abutments and noise suppression clips
- Dual seals resisting dust, weather and pressure
- Two-piece vented rotor, slotted and drilled, zinc plated, mounted to a billet aluminum hat
- Powder-coated finish; calipers CNC machined from forged or billet aluminum sourced in the US
- Stainless braided hoses, DOT approved
- Made in Phoenix, AZ
Before you buy
A rear disc kit replaces the stock rear brake arrangement, so the wheel, hub and backing plate all need to be checked together. Rotor diameter and minimum wheel diameter determine whether your existing wheel will clear the caliper, and wheel offset matters as much as diameter. Measure your current wheels against the template before committing to a finished installation.
Pad compound affects how quickly the rotor wears and how much noise the brakes make when cold. Use the pad type this kit is built around when replacing pads, and check the caliper pistons and seals during each brake service. Bleed the hydraulic lines after installation and after any hose change so the pedal stays firm under load. Keep an eye on hose condition, since braided hoses can hide wear under the sleeve.
- Measure wheel clearance before mounting tires
- Replace pads before the backing plate contacts the rotor
- Inspect park brake shoe adjustment at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262151HO |
| UPC | 90127948743 |
| Caliper | 6P six-piston, fixed |
| Caliper color | Hugger Orange |
| Rotor diameter (rear) | 14.0 inch |
| Rotor construction | Two-piece, vented |
| Rotor thickness | 1.15 |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor hat | Billet aluminum |
| Pad type (FMSI) | D0731 |
| Axle flange | Ford 9 inch early big bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Steel braided, DOT approved |
| Park brake | Included, one-piece shoe |
| Grade | Performance |
| Template | Q082P |
| Country of origin | USA |
| Sold as | Kit |
Vehicle fitment
It is built for Ford 9 inch rear ends with early big bearing housing ends. Compare your axle flange with that early big bearing style before buying.
Late big bearing housing ends need a different kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come pre-assembled with NAS stainless hardware, and braided hoses are supplied. Baer recommends the Q082P template for checking wheel clearance, because wheel style can change fit. Park brake cables must be obtained separately.
What’s included
Calipers in 6P form, two-piece rotors with NAS hardware, a backing plate carrying the park brake shoe, stainless braided hoses and hardware.
Not included: Park brake cables.















