Overview
The Baer Brakes 4262689S is an SS4 Plus rear brake system with an 11 inch two-piece slotted and drilled rotor and a four-piston S4 caliper, built for Ford 9 inch early big bearing rear housing ends with a 5×4.50/5×4.75 bolt pattern. It is a silver rear-axle kit for owners who want a larger, vented braking setup.
The 11 inch SS4 Plus is designed to fit most wheels 15 inch or larger. Clearance still depends on wheel design, so check the S125A template against the wheel you plan to use before ordering.
Key features
- Two-piece four-piston S4 caliper in silver, manufactured in Phoenix, AZ.
- CNC machined from U.S.-sourced forged or billet aluminum, with a powder coated finish.
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips.
- Dual dust, weather and pressure seals.
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat.
- Uses the DR1-C pad type.
- Stainless braided hoses, mounting brackets and NAS stainless hardware are included.
Choosing a braking setup
Choosing a rear kit starts with the axle housing, because big and small bearing ends use different flanges and bolt arrangements. Confirm the axle type before comparing calipers, then match the rotor size to the wheel you plan to run. Larger rotors add thermal capacity but can reduce wheel clearance.
Brake lines and hoses are often replaced when a rear kit goes in, especially on older vehicles where the rubber has hardened. Inspect the lines for cracks and flexing before reusing them. Park brake hardware, cables and adjustment should also be checked for wear.
Professional installation makes sense for rear axles, since bearing preload, hub seating and brake bleeding all affect how the setup performs. Test the brakes at low speed before normal driving.
- Confirm axle housing type first
- Match rotor size to wheel clearance
- Replace aged rubber brake lines
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262689S |
| UPC | 844165051343 |
| Caliper | S4, four pistons, fixed type |
| Caliper color | Silver |
| Rotor outside diameter | 11 inch |
| Rotor thickness | 1.020 inch |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Hose material | Steel braided, DOT approved |
| Brake pad type | DR1-C (FMSI) |
| Lug count | 5 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 15 inch |
| Axle flange | Ford 9 inch early big bearing |
| Template | S125A |
| Grade | Performance |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
Vehicle fitment is for Ford 9 inch early big bearing housing ends with a 5×4.50/5×4.75 bolt pattern. Match your year, model and trim to your axle before buying.
Compare your axle housing and wheel against the template before ordering.
Installation notes
The rotors arrive pre-assembled with stainless hardware, and the mounting brackets, braided hoses and hardware are included, which reduces loose parts at mounting. Because this is a rear braking system, have a qualified shop complete the installation, check wheel clearance and test the brakes before driving.
What’s included
The kit includes the two-piece rotors pre-assembled with NAS high grade stainless hardware, the S4 calipers, all mounting brackets, and stainless braided hoses with hardware.
Not included: Lug nuts and the park brake are left out of this kit, so buyers need to source both separately.















