Overview
The Baer Brakes Extreme Plus front brake system kit, part 4261017S, is a silver front disc brake kit for 1997–2003 Ford F-150 4WD trucks. It combines a 1-piece Monoblock 6-piston, 6S caliper with a 14-inch two-piece slotted, drilled rotor that has a billet aluminum hat, and it is built around the D1247 pad type.
It is made for four-wheel-drive F-150 trucks from the 1997–2003 model years. The 14.0 inch rotor fits wheels 18 inch or larger, and the rotors arrive pre-assembled with stainless hardware. The caliper is a fixed type with 6 pistons.
Key features
- 6S six-piston monoblock caliper, 1-piece design, made in Phoenix, AZ
- CNC machined from US-sourced 2618 aluminum forging
- Powder coated finish
- Stainless pistons and abutments with noise suppression clips
- Pistons staggered to even out pad wear
- Dual seals resist dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
Front brake wear and upkeep
Front disc brakes do most of the stopping work on a full-size pickup, so wear shows up in the pads and rotors first. Pads wear faster on heavy trucks that tow or carry loads, and a worn pad can score the rotor face. Check pad thickness at each tire rotation and look for grooves, blue discoloration or heat cracks on the rotor surface. Slotted and drilled rotors help clear gas and debris, but the drilled holes can crack under heavy use, so inspect them as part of routine service.
Caliper pistons and seals need clean, dry surfaces to move freely. Dust boots and slide pins should be checked whenever pads are changed, since a sticking piston can drag and overheat a rotor. Brake fluid absorbs moisture over time, so replacing it on a regular schedule helps the hydraulic system respond properly. After new pads or rotors are fitted, bed them in with controlled stops so the friction material transfers evenly.
- Pad thickness and rotor face condition at every tire rotation
- Pulsation or steering wheel shake under braking
- Fluid level and age in the reservoir
- Hose condition and any fluid seepage at fittings
- Lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261017S |
| UPC | 844165034858 |
| Kit type | Kit |
| Caliper | 6S, 1-piece Monoblock, 6 pistons, fixed type |
| Caliper color | Silver |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 inch |
| Front rotor included | Yes |
| Lug nuts included | No |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.315 in |
| Minimum wheel diameter | 18.0 inch |
| Brake pad type | D1247 (FMSI) |
| Hoses | Re-uses OE hoses |
| Drive | 4WD |
| Axle | Front |
| Grade | Performance |
| Template | N045P |
| Country of origin | US |
Vehicle fitment
It fits the 1997–2003 Ford F-150 in 4WD configuration.
Fit is established for 1997–2003 Ford F-150 4WD trucks only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive pre-assembled with NAS high grade stainless hardware, and mounting brackets and hardware are included. Check wheel clearance with template N045P before choosing a wheel; the 14-inch rotor fits most wheels 18 inch or larger. Have a qualified technician check the brakes after installation, since braking depends on correct assembly.
What’s included
The kit includes the 6S caliper, the two-piece front rotor with billet aluminum hat, and the mounting brackets and hardware.
Not included: lug nuts.














