Overview
Baer’s red Pro Plus rear brake kit, part 4262193R, targets Ford 9 inch rear ends that use Torino (late big) bearing housing ends. Its 5×5.00 bolt pattern and 13.0 inch rotor define the fit, and the red six-piston fixed caliper clamps a two-piece slotted and drilled rotor with zinc plating and an aluminum hat. Baer ties the system to Template Q082H and the D0731 pad type.
The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, which keeps park brake hardware inside the rear package. Rotors come assembled with stainless NAS hardware. The staggered piston layout helps limit uneven pad wear, and the 13 inch rotor suits wheels of 17 inch or larger.
Key features
- Red six-piston (6P) caliper with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons layout intended to limit uneven pad wear
- Dust, weather and pressure dual seals on the caliper
- Two-piece slotted, drilled rotor with billet aluminum hat and zinc plated surface
- Park brake shoe assembly built into the backing plate
- Braided steel hoses, DOT approved, with stainless hardware
- Powder coated finish; caliper parts CNC machined from US sourced forged or billet aluminum
Rotor and wheel fit
Rotor and wheel fit depends on more than diameter. The wheel’s back spacing and the caliper body must clear each other, and the rotor hat must seat flat against the flange. Before the first install, slide the wheel on without the tire and check for contact at the caliper and the backing plate.
Red calipers show brake dust less clearly than darker finishes, so inspect the rotor surface and pad edges more often. Heat marks, scoring and uneven wear are the main signs that a rotor or pad needs attention. Torque the wheel fasteners in a star pattern and re-check them after the first few runs.
- Check wheel clearance at the caliper body before mounting
- Inspect rotor surface for heat marks at each pad change
- Re-check wheel fasteners after the first few runs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262193R |
| UPC | 844165037125 |
| Caliper | Six-piston (6P) fixed, red |
| Rotor outside diameter | 13.0 inch |
| Minimum wheel diameter | 17.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Surface finish | Zinc plated |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Pad type (FMSI) | D0731 |
| Template | Q082H |
| Hose material | Steel braided, DOT approved |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Hardware | NAS high grade stainless |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It fits Ford 9 inch rear ends with Torino (late big) bearing housing ends and a 5×5.00 bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
Coverage is limited to the rear axle described; no front brake application is listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are absent from this kit, so the park brake will need separate cable routing. Rotors arrive pre-assembled, so verify wheel clearance against the Q082H template before mounting the wheel. Any hose or caliper change calls for bleeding the hydraulic lines afterward.
What’s included
Included in this package: the red six-piston caliper, the two-piece rear rotor with aluminum hat, the backing plate with park brake shoe assembly, braided steel hoses and stainless hardware.
Not included: Lug nuts, park brake cables and a front rotor are left out of this package.















