Overview
The Baer Brakes 6929224 is a right-side, two-piece replacement rotor ring with a slotted, drilled and zinc-plated surface. It measures 14.95 inch outside diameter and 1.33 inch nominal thickness, with 12 mounting holes on an 8.50 inch bolt circle. Part number 6929224 is the number to match when you compare it with the ring you are replacing.
This is a vented cast iron rotor ring of performance grade. It is directional and made for the right side only. Each rotor ring is sold individually. Because it is a two-piece design, the hat or hub it mounts to is a separate component.
Key features
- Two-piece rotor ring construction
- Slotted, drilled and zinc-plated friction surface
- Vented design with curved vanes for cooling
- Dynamically balanced for vibration-free performance
- Purpose-built cast iron castings made from premium materials
- Directional right-side design
- Designed to resist distortion and keep rotor stability
Hat and hub compatibility
Two-piece rotor rings separate the friction ring from the hat, so the hat carries the mounting load and holds the pattern. When a ring wears out, the hat can often stay in place if it is sound. Inspect the hat for cracks, corrosion and loose fasteners before bolting on a new ring, because a worn hat can cause runout and vibration.
Two-piece designs depend on fasteners that seat fully and are tightened to the torque suited to the hub and hat. Because the ring is directional, check the orientation before installation. Inspect pads, hardware and wheel bearings at the same time, since a fresh ring on a worn hub can wear quickly.
- Confirm the hat is free of cracks
- Replace worn mounting fasteners
- Match the ring orientation to the right side
- Check wheel bearings during the swap
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929224 |
| UPC | 844165052302 |
| Construction | Two piece |
| Side | Right |
| Brake surface | Directional |
| Solid or vented | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 14.95 inch |
| Nominal thickness | 1.33 inch |
| Mounting bolt holes | 12 on an 8.50 inch bolt circle |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is intended for select Baer Brake systems, so check the 12 x 8.50 inch mounting pattern against your current setup.
Installation notes
A two-piece rotor ring needs a separate hat or hub to mount onto, so confirm that hub is compatible before installation. The rotor is right-side and directional, so fit it only to the right side. Have a qualified technician complete the installation and check the assembly.
What’s included
One right-side two-piece rotor ring, sold individually.
Not included: The hat or hub the rotor ring mounts to is a separate component.
