Overview
The Baer Brakes 6920324 is a 12 inch, one-piece right replacement brake rotor with a short hat, a slotted, drilled and zinc-plated surface, and a 5 x 4.50 inch bolt pattern. It is designed for select Baer Brake systems and is sold individually.
The rotor is a full cast, one-piece vented cast iron part. Its short hat, 2.799 inch center hole and 1.717 inch overall height define how it mounts. The brake surface is directional, so the rotor is made for the right side only.
Key features
- One-piece full cast construction with a short hat
- Slotted, drilled and zinc-plated friction surface
- Vented design with a curved vane pattern, which Baer says improves cooling
- Directional surface built for the right side of the vehicle
- Dynamically balanced for vibration-free running
- Five studs on a 4.5 inch stud or lug hole circle
Before you buy
A rotor replacement is a good time to look at the rest of the brake assembly. Pads, calipers and the hub face all affect how a new rotor wears and how smooth it runs. Slotted and drilled surfaces help clear gas and debris from the pad face, but they can crack under heavy heat if the pads and fluid are not suited to the driving you do, so choose pads to match your use.
Directional rotors need extra care at install time. Mark the side before removal and fit the rotor so the rotation arrow faces forward. Replacing rotors in pairs keeps braking even from side to side. Clean the hub face and remove rust with a wire brush so the rotor seats flat, and check runout with a dial indicator if pulsation shows up after the first stops.
- Clean the hub face before mounting
- Bed in new pads after installation
- Check the hub for wear or grooving
- Replace left and right rotors as a pair
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920324 |
| UPC | 844165037095 |
| Construction | Full cast, one piece |
| Axle side | Right |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Solid or vented | Vented |
| Drum in hat | No |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 12 inch |
| Nominal thickness | 1.1 inch |
| Overall height | 1.717 inch |
| Center hole diameter | 2.799 inch |
| Stud/lug hole circle diameter | 4.5 inch |
| Stud/lug hole quantity | 5 |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is designed for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the rotor is installed on the right side, since the brake surface is directional. Check the 2.799 inch center hole against the hub before fitting the rotor. Because the rotor is sold individually, a left-side rotor is needed to match the opposite wheel. Have a qualified technician check the installation.
What’s included
One right-side one-piece rotor with short hat, sold individually.
Not included: the left-side rotor, brake pads, calipers, and any ABS tone ring.
