Overview
The Baer Brakes 6910225 is a left-side, 1-piece slotted replacement brake rotor for select Baer Brake systems. It measures 14 inches in outside diameter and 1.181 inches in nominal thickness, with 6 lug holes on a 5.50 inch stud circle and a 3.098 inch center hole.
Replacement rotors such as this one restore the friction surface of a Baer brake system after wear. Because the rotor is directional and made for the left side of the vehicle only, the right-side rotor is a separate part and must be ordered on its own.
Key features
- Purpose built castings made from premium materials
- Curved vane design for optimum cooling
- Engineered for rotor stability and resistance to distortion
- Dynamic balanced for vibration-free performance
- Slotted surface finish
- Directional design for the left side of the vehicle
Choosing a replacement rotor
Brake rotors work with the pads and calipers as one friction system. The rotor provides the surface the pads clamp against, so its condition affects pedal feel, stopping consistency and noise. When a rotor is replaced, the pads are usually replaced at the same time so the new surface wears evenly from the start.
Directional rotors must go on the correct side of the vehicle. Slotted surfaces help clear debris and gas from the pad face, while vented construction helps the rotor shed heat during repeated stops. Check the hub surface and the wheel mounting face for rust or debris before the rotor is seated.
Because this rotor is made for the left side only, set aside the parts and keep them separated before handling. Confirm the bolt pattern and center bore match the hub before fitting, and tighten the wheel fasteners in a star pattern after installation.
- Replace pads with the rotor when they are worn.
- Inspect the rotor for cracks, heavy scoring or uneven wear.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910225 |
| UPC | 90127961018 |
| Rotor type | 1-piece, full cast, vented |
| Surface type | Slotted |
| Directional or non-directional brake surface | Directional |
| Axle position | Left |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 14 in |
| Nominal thickness | 1.181 in |
| Overall height | 3.764 in |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 in |
| Center hole diameter | 3.098 in |
| ABS tone ring included | No |
| Country of origin | USA |
| Packaging | Each |
Vehicle fitment
It is made for select Baer Brake systems. Confirm which Baer system it matches for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so it must be installed on the left side only. The ABS tone ring is not included with this rotor, so plan for the tone ring your existing hardware uses. Check that the 6 lug holes line up with the hub before final assembly.
What’s included
One left-side replacement brake rotor, Baer Brakes part 6910225.
Not included: the right-side rotor, the ABS tone ring, and other brake hardware.
