Overview
Baer Brakes part 6920151 is a two-piece, plain-faced replacement rotor ring, 12 inches in outside diameter, for right-side use on Baer Brake applications. Plain means the friction surface has no slots or drilled holes. It is a vented cast-iron design with twelve mounting holes on a 7.50-inch bolt circle.
The casting uses premium materials and a curved vane layout to aid cooling. The rotor is dynamic balanced to reduce vibration. Its directional design means the right-hand ring cannot be swapped to the left. Confirm the Baer system and side against your existing parts before fitting.
Key features
- Plain braking face with no slots or drilled holes
- Directional right-side build
- Curved vane design intended for cooling
- Dynamic balanced rotor ring
- Cast iron, vented, Performance grade type
- Two-piece construction
Plain faces and pad choice
A plain friction face has no slots or holes, so the pad contacts a continuous surface. This style suits everyday driving well and keeps the face simple to inspect for scoring or uneven wear. Because nothing is cut into the face, the pad material bed-in and surface finish are what most affect how the brakes feel.
Matching the pad to the rotor is the main decision with a plain ring. Pads that are too aggressive can glaze the face, and worn pads can leave lips or grooves. Check the face for heat marks and clean the mating surfaces on each service.
- Check the face for heat marks and glazing
- Inspect for grooves or a worn outer lip
- Match pad compound to daily driving
- Clean the hat and ring mating surfaces
- Replace worn hardware along with the ring
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920151 |
| UPC | 844165012245 |
| Country of origin | USA |
| Sold as | Each |
| Axle | Right |
| Construction | Two piece |
| Brake surface type | Directional |
| Solid or vented | Vented |
| Material | Cast iron |
| Grade type | Performance |
| Surface type | Plain |
| Outside diameter | 12 inches |
| Nominal thickness | 0.81 inch |
| Mounting bolt hole circle diameter | 7.50 inch |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
It is made for Baer Brake applications. Confirm fit against your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only the right-hand position suits this directional ring, so a left-side rotor belongs on the opposite wheel. The ABS tone ring is not supplied, so keep your existing tone ring if your hub uses one, or supply a replacement.
What’s included
One Baer Brakes 6920151 two-piece plain rotor ring, right side, sold individually.
Not included: ABS tone ring.
