Overview
The Baer Brakes 6920222 is a right-side, two-piece vented replacement brake rotor with a 14 inch outside diameter and a 1.15 inch nominal thickness. The rotor is cast iron with a slotted, drilled and zinc-plated face and 12 mounting bolt holes on an 8.5 inch bolt circle, and it is used in the Baer ES+2 system and select other Baer brake systems.
Because the rotor is directional, the right-side 6920222 is sold separately from its left-side partner. It is a performance-grade replacement for owners running a Baer brake setup. Verify the Baer system and bolt pattern before you buy.
Key features
- Engineered from premium cast iron castings
- Curved vane layout intended to help cooling
- Designed for stability and resistance to distortion
- Dynamically balanced for smooth, vibration-free braking
- Slotted, drilled and zinc-plated surface
- Directional brake surface for the right side
- Two-piece vented construction
Pads, bedding and wear
Brake pads and rotors wear as a pair, so the pad compound and the rotor surface should suit each other. A pad that is too hard can glaze a rotor, and a very soft pad can wear the face unevenly. When installing new rotors, remove any rust-preventive coating with brake cleaner so the pad can seat flat from the first stop.
Bedding in new pads and rotors means making a series of moderate stops that transfer an even layer of friction material to the rotor face. Avoid heavy or prolonged stops until the bedding is finished, and let the brakes cool between passes. Uneven contact often shows up as pulsation or shudder, and a technician can check the rotor for thickness variation if that happens.
- Remove preservative coating before fitting
- Choose pads matched to the rotor’s surface
- Bed in pads with moderate stops
- Re-check bolts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920222 |
| UPC | 844165012276 |
| Axle side | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Outside diameter | 14 in |
| Nominal thickness | 1.15 in |
| Mounting bolt holes | 12 |
| Mounting bolt hole circle diameter | 8.5 in |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. Compare the 14 inch diameter and 8.5 inch bolt circle with your current rotor, since other Baer rotors in this range use different sizes.
Installation notes
Confirm you have the right-side rotor before mounting, since it is directional. Check the 1.15 inch thickness and 14 inch diameter against your caliper clearance and hub, and have a qualified brake technician verify the fit before the vehicle returns to the road.
What’s included
One right-side rotor, sold as each.
Not included: the left-side rotor, and an ABS tone ring (the part details state none is included).













