Overview
The Baer Brakes 05598-020 is a set of two front Claw performance rotors for select 1992 to 2002 Chevrolet and GMC full-size trucks, Suburbans and vans. Each rotor is a one-piece, full cast direct replacement for the factory front disc, so it is meant to take the place of the original part rather than require a different hub.
Baer Brakes presents the Claw design as a way to improve braking performance and appearance. The cross-drilled and slotted friction surface gives gas and dust a path out from between the pad and rotor, which the brand links to a steadier pedal and reduced brake fade during repeated stops. The rotors are zinc-plated for a bright look behind open center wheels.
Key features
- Cross-drilled and slotted friction surface that channels gas and dust away from the pad face
- Vane structure designed to aid cooling and durability.
- Premium, mill balanced, direct replacement rotor
- Chamfered cross-drilled holes to reduce stress cracking
- Zinc-plated finish for a bright look in open center wheels
- Sold as a set with ABS tone ring included
Pad and rotor pairing
Pads and rotors wear together, so replacing rotors is a good time to inspect the pads, calipers and brake lines. Friction material that is worn unevenly or glazed can cause vibration and reduced bite even on a new rotor, so match the pad compound to how the truck is used. Heavy towing and steep grades put more heat into the rotor, which makes a pad with a suitable operating range a practical choice.
Slotted and cross-drilled faces help clear debris, but their edges can wear pads faster with some compounds. Look for scoring, a raised lip at the outer edge, or pulsation under braking as signs the old rotor was past its service life. Clean the hub face and remove any rust before seating the new rotor so it sits flat against the hub.
- Inspect caliper slide pins for smooth movement
- Torque lug nuts in a star pattern after fitting
- Check the brake hoses for cracks before reassembly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 05598-020 |
| UPC | 844165000259 |
| Axle | Front |
| Drive | 2WD |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented, directional brake surface |
| Surface type | Slotted and drilled |
| Disc finish | Zinc plated |
| Grade type | Premium |
| Stud/lug hole quantity | 8 |
| Mounting bolt hole circle diameter | 165 |
| Outside diameter | 317.5 |
| Overall height | 125.7 |
| Discard thickness | 31 |
| ABS tone ring included | Yes |
| Sold as | Set |
| Country of origin | CN |
Vehicle fitment
Fits these front-axle applications:
- 1994-1999 Chevrolet C1500 Suburban
- 1992-1999 Chevrolet C2500 Suburban
- 1992-2000 Chevrolet C3500
- 1996-2001 Chevrolet Express 3500
- 1994-1999 GMC C1500 Suburban
- 1992-1999 GMC C2500 Suburban
- 1992-2000 GMC C3500
- 1996 GMC G3500
- 1996-2002 GMC Savana 3500
Not covered: 1500 pickups other than the 1994-1999 Suburban, and any model or year outside the ranges above, including 2003 and later vans. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The ABS tone ring is included with these rotors, so check that it is present and seated correctly when fitting them. Bed in new pads using the procedure supplied with those pads after installation. Brake changes shift stopping distance, so drive gently until you have checked the new rotors.
What’s included
A pair of front Claw performance rotors, sold as a set.
















