Overview
The Baer Brakes 6910295 is a left-side, 2-piece replacement brake rotor with a plain friction surface, sized 13.150 inches across and 1.250 inches thick. It is intended for select Baer Brake systems and is sold as one rotor, so a left and right pair means two units.
The casting is purpose built, and the curved vane layout supports cooling. The rotor is dynamically balanced for smooth running. Because the surface is directional, this rotor belongs on the left side only, and its plain face has no slots.
Key features
- Plain, unslotted friction surface
- Two-piece construction
- Curved vane design for cooling
- Vented cast iron body
- Directional, left side only
- Dynamic balanced for smooth running
Plain versus slotted faces
A plain friction face is a common choice for road-going brakes. It has no slots to collect debris, so pad contact stays consistent when the surface is clean. Pad choice still matters most for noise, bite and wear, so the friction material should suit how the vehicle is driven.
A plain rotor still needs regular checks. Look for scoring, a lip at the outer edge, or blue heat marks that show overheating. After a new rotor is fitted, bed the pads and rotor together with gradual stops rather than repeated hard braking. Confirm the rotor is clean of grease before installation, since oil on the face can cause squeal and reduced braking.
- Clean the hub face and rotor mating surface before fitting
- Check runout with a dial indicator if pulsing occurs
- Replace the ABS tone ring if it is damaged or loose
- Keep a left and right set matched in pad type
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910295 |
| UPC | 844165012078 |
| Outside diameter | 13.150 in |
| Nominal thickness | 1.250 in |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 7.625 in |
| Axle side | Left |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is made for the left side of select Baer Brake systems. Confirm the 13.150 inch diameter and the 12-hole, 7.625 inch bolt circle against your brake system before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the left-side rotor only on the left side and confirm the directional orientation before tightening anything. A left and right set needs two separate units. Measure your hub and bolt pattern before starting, and have a qualified technician review the completed brake job.
What’s included
One left-side 2-piece plain replacement rotor, sold as each.
Not included: ABS tone ring, and the right-side rotor, which is sold individually.
