Overview
The Baer Brakes 6920079 is a right-hand, 1-piece plain-finish replacement brake rotor in the tall hat style. It measures 13.000 inch across and 1.100 inch thick, with five studs on a 4.75 inch circle, and the maker positions it as a fit for select Baer Brake systems.
Because the surface is plain, the friction face carries no slots or drilled holes. The rotor is directional and marked for the right side, so it cannot be swapped across the axle. Its overall height is 2.232 inch and its center hole is 2.781 inch, which are the first dimensions to compare with an existing hub.
Key features
- Right-hand directional rotor that is not interchangeable across sides
- Plain surface with no slots or drilled holes
- Vented, 1-piece full cast body
- Curved vanes meant to improve cooling
- Dynamic balance to reduce vibration
- Cast iron material with a Performance grade type
- Emission code 6 and 2.232 inch overall height
Plain versus slotted faces
A plain friction face is one continuous surface, so there are no slot edges to collect debris or develop cracks at the ends of cuts. Cleaning is simpler, and the pad contact area stays uniform across the rotor. Plain rotors rely on the pad compound and bedding procedure to deliver consistent friction, so pad choice matters more than it does with a grooved face.
Before installation, wipe the friction face and hub mating surface with brake cleaner to remove any protective coating or oil. Keep fingers off the friction face after cleaning. Check that the hub is free of rust and that the wheel studs sit square, since a poorly seated rotor can produce pulsation that feels like a warped disc.
- Bed in new pads with several moderate stops
- Clean the hub mating surface before fitting
- Check pad compound against the rotor’s use
- Look for uneven wear across the friction face
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920079 |
| UPC | 844165035947 |
| Axle side | Right |
| Surface type | Plain |
| Solid or vented | Vented |
| Brake surface | Directional |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| Outside diameter | 13.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.232 inch |
| Center hole diameter | 2.781 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is built for select Baer Brake systems. Compare the 5 x 4.75 inch bolt pattern, 2.781 inch center hole and 13.000 inch diameter with your current brake components before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the right-hand orientation before the rotor goes onto the hub, since the directional design is meant for one side only. The ABS tone ring is marked not included, so an existing ring on the hub should stay in place. Make a couple of low-speed stops after installation to check the pedal before driving normally.
What’s included
One right-side plain replacement rotor, sold as each and supplied individually.
Not included: Brake pads, calipers, hub hardware and an ABS tone ring are separate items.
