Overview
The Baer Brakes 6929622 is a plain-surface, right-side, one-piece cast iron replacement rotor. It is 12.000 inches in diameter and 1.020 inches thick, with a drum in hat and a modified drum lip, intended for select Baer Brake systems.
The surface is plain, with no slots or drilling. It uses a curved vane layout for cooling, a directional design and a performance grade. Each rotor is sold individually because each side is built separately.
Key features
- Plain friction surface with no slots or drilling
- Curved vane design for cooling
- One-piece full cast body in cast iron
- Dynamically balanced for vibration-free performance
- Drum in hat with modified drum and drum lip
- Directional, vented right-side rotor
- Built for stability and resistance to distortion
Plain rotors and braking feel
A plain friction surface relies entirely on the pads for bite, which makes the pad choice more important than with a patterned rotor. Pads wear the face evenly over time, so a smooth, consistent pattern on the rotor indicates good contact. Plain surfaces tend to be gentle on pad material and produce less dust, though they clear water and gas less readily than slotted or drilled faces.
Dynamic balance and a clean hub face help keep brake pulsation out of the steering wheel. Before driving, clean any grease from the mounting surface and seat the rotor fully against the hub so it sits flat. Bedding in new pads with a series of moderate stops allows an even transfer layer to form on the rotor, which supports consistent stopping from the first trip.
- Wipe the rotor face with brake cleaner before fitting
- Torque lug nuts in a star pattern
- Pump the pedal before moving the vehicle
- Recheck lug nut torque after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929622 |
| UPC | 90127962503 |
| Outside diameter | 12.000 inches |
| Nominal thickness | 1.020 inches |
| Overall height | 2.406 inches |
| Stud/lug bolt pattern | 5 studs on a 4.75 inch circle |
| Stud/lug hole quantity | 5 |
| Center hole diameter (register) | 2.780 inches |
| Axle side | Right |
| Construction | One-piece, full cast |
| Rotor type | Vented, directional |
| Surface | Plain |
| Material | Cast iron |
| Grade | Performance |
| Drum in hat | Yes, with modified drum and drum lip |
| ABS tone ring | Not included |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Fit depends on the select Baer Brake system on your vehicle. Check the 5 x 4.75 inch bolt pattern, 2.780 inch register and 12.000 inch diameter against your hub.
Slotted and drilled versions with the same diameter are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this directional rotor on the right side only. Check clearance against the caliper and hub before final assembly, since the drum lip sits inside the hat. Brake work affects stopping distance, so inspect the finished assembly before driving.
What’s included
One right-side plain-surface rotor, sold individually.
Not included: ABS tone ring.
