Overview
The Baer Brakes 55143-020 is a front Claw performance rotor set for the 2006–2009 Chevrolet Trailblazer SS and 2008–2009 Saab 9-7X Aero. It contains a pair of one-piece, full cast iron, vented rotors with a slotted and cross-drilled friction face, built as direct replacements.
Slotted and drilled rotors are a common choice for drivers who want brakes to shed heat and dust quickly. The slots and cross holes let gases and dust escape from between the pad and rotor during braking. The design is built for a steadier pedal feel with less fade. The zinc-plated finish suits open center wheels.
Key features
- Slots and cross-drilled holes vent gases and dust away from the friction zone.
- Enhanced vane design is intended to improve cooling under braking.
- Premium, mill balanced direct replacement rotor.
- Holes are chamfered to help limit stress cracking.
- Zinc plating gives a bright finish visible through open wheels.
- Directional brake surface, with each set containing a pair.
Solid or drilled rotors
Drilled and slotted rotors trade some pad life for faster gas and dust release, which many drivers prefer on heavier vehicles that see repeated stops. Plain solid rotors are quieter and wear pads more gently, but they can hold more heat and debris against the pad face. Driving style and load usually decide which suits a given vehicle better.
Front rotors on a vehicle like this work with the pads, calipers and hub as one assembly. Hub and bearing condition, caliper slide movement and brake line integrity all affect how smoothly a new rotor runs. Fresh pads and clean hub surfaces help the rotor seat evenly and avoid pulsation.
- Drilled faces shed gas and dust, but they can crack if overheated
- Pads wear faster on slotted faces than on plain faces in many setups
- Clean the hub mounting face before fitting new rotors
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 55143-020 |
| UPC | 844165031444 |
| Sold as | Set (pair of rotors) |
| Axle | Front |
| Construction | One piece, full cast |
| Rotor type | Vented |
| Surface type | Slotted and drilled |
| Brake surface | Directional |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Grade | Premium |
| Outside diameter | 325 |
| Overall height | 54.7 |
| Mounting bolt hole circle diameter | 127 |
| Stud/lug hole quantity | 6 |
| Discard thickness | 27.5 |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list covers the front position on two vehicles: the 2006–2009 Chevrolet Trailblazer SS and the 2008–2009 Saab 9-7X Aero.
The Trailblazer entry is limited to the SS model, so standard Trailblazer models outside that trim are not in this list. Rear positions are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only the rotors are described, with no hardware list, and no drilling or welding is mentioned. Compare the 127 bolt circle and 6 studs against your hub before fitting. Because brakes are safety equipment, a trained brake technician should handle the install.
What’s included
A pair of front Claw rotors, sold as a set.
Not included: an ABS tone ring.














