Overview
The Baer Brakes 6920327 is a right-side, 2-piece replacement rotor ring with a slotted friction face. Its outside diameter is 12.000 inch and its nominal thickness is 1.100 inch. It is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
The friction face is slotted only, with no drilled holes. The ring is a vented, full cast iron casting with 12 mounting holes on a 7.500 inch bolt circle. Its directional design means the ring is made for the right side of the vehicle alone. The specifications table gives the full construction details for side-by-side comparison.
Key features
- Slotted friction face
- Two-piece ring construction
- Vented, full cast iron body
- Curved vanes intended to aid cooling
- Premium castings engineered for stability and resistance to distortion
- Dynamic balanced for vibration control
- Directional right-side design
Slotted face and pad choice
A slotted friction face helps clear pad debris and gases from the contact area, which can help keep pad contact steady during repeated stops. Slots also give the pad edge a place to grip, which is one reason slotted surfaces suit drivers who use their brakes hard on the trail or on steep grades. The tradeoff is that slots can wear pads faster than a smooth face, so pad compound matters.
Pair the ring with pads sold for slotted surfaces and a compound suited to your driving. Bed the pads in on the new ring with several moderate stops before heavy braking. Keep the ring’s directional orientation in mind when checking the side marking, and keep the friction face clean of grease before fitting. Inspect the slots periodically; packed debris or a lipped edge is a sign to replace the ring.
- Use pads rated for slotted rotors
- Check the side marking before installation
- Keep grease off the friction face
- Re-check hub hardware after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920327 |
| UPC | 90127961940 |
| Axle side | Right |
| Construction | Two piece |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.100 inch |
| Mounting bolt hole circle diameter | 7.500 inch |
| Mounting bolt hole quantity | 12 |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. Do not fit this right-side ring on the left side of the axle.
Installation notes
The directional ring goes on the right side only, so check the side marking before fitting. Confirm the ring and hardware match your hub for your vehicle’s year, model and trim before ordering. Pair the slotted face with pads designed for a slotted surface.
What’s included
The two-piece rotor ring only, sold individually.
Not included: No ABS tone ring is supplied with it. Check the hardware needed for your application before installing.
