Overview
The Baer Brakes 6910097 is a one-piece, left-side short hat brake rotor with a plain surface. It measures 12 inch across and 0.81 inch thick, with an overall height of 1.988 inch. Baer built this full cast, vented cast iron rotor for select Baer Brake systems and supplied it as a single left unit.
The plain surface has no slots or drilling, and the rotor is Performance grade. Curved vanes support cooling, and the rotor is balanced for smooth running. Confirm compatibility with your Baer system before installing.
Key features
- Plain friction surface without slots or drilling
- Short hat with one-piece full cast construction
- 2.783 inch center hole for the hub register
- Five-hole, 4.75 inch lug pattern
- Directional design for the left side
- Vented cast iron body
Short hat rotors on the road
A short hat rotor works as a disc-only part, so the hat carries the mounting face without a drum. This design is common where space is limited around the axle. On the road, the rotor relies on steady pad contact and clean friction surfaces, while off-road use exposes it to mud, grit and water, which can corrode the hub mounting surface.
After off-road trips, rinse the rotor and hub, check for rust on the mounting face, and look for stone damage on the friction surface. Plain surfaces are simple to inspect for scoring. Confirm the hub, caliper bracket and wheel clearance before installation, and keep the directional face on the correct side.
- Rinse mud and grit after trail use
- Check the hub face for rust
- Inspect for stone chips and scoring
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910097 |
| UPC | 844165034551 |
| Axle side | Left |
| Construction | One piece, full cast |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Material | Cast iron |
| Outside diameter | 12 inch |
| Nominal thickness | 0.81 inch |
| Overall height | 1.988 inch |
| Center hole diameter | 2.783 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Drum in hat | No |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The year, model and trim you own decide fit, so confirm them before ordering. Match the 5-hole pattern and hub to the rotor.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so it goes on the left side only. Verify the 2.783 inch register and the 5-hole pattern against the hub before fitting, and have a qualified technician finish the work.
What’s included
One left-side plain-surface short hat rotor, sold as Each.
Not included: a right-side rotor, since rotors are sold individually.
