Overview
The Baer Brakes 6929098 is a right-side replacement brake rotor: a 1-piece, full cast, slotted, drilled and zinc-plated vented rotor with a 12.000 inch outside diameter and 1.020 inch nominal thickness. It is made for select Baer Brake systems and is directional, so it is built for the right side of the vehicle only.
The casting uses a curved vane design for cooling and is dynamically balanced for vibration-free running. Rotors are sold individually, so a left and right pair needs two separate purchases. Compare the 5 x 4.75 inch bolt pattern and 2.810 inch center hole against your hub before ordering.
Key features
- Full cast, one-piece construction
- Slotted, drilled and zinc-plated surface
- Curved vane design for optimum cooling
- Dynamic balanced for vibration-free performance
- Directional brake surface for the right side only
- Drum in hat design
Before you buy
Slotted and drilled rotors are built to shed gas and water and to keep the pad surface clean, but they put more stress on the friction surface than a plain rotor. Their performance depends on the pads, the hub condition and the way the system is bedded in, so the rotor is only one part of a complete brake job.
Check the hub face, bearing play and wheel studs before fitting a new rotor. Remove rust and debris from the mounting surface so the rotor sits flat. Because the part is directional, make sure the right-side rotor goes on the right side only. If the old rotor carried an ABS tone ring, plan how that ring will be transferred or replaced, since this rotor is supplied without one.
- Clean the hub face and mounting studs before installation
- Inspect the old rotor for cracks, heat checking and uneven wear
- Replace rotors in pairs to keep braking balanced side to side
- Use brake pads matched to the rotor and driving style
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929098 |
| UPC | 844165054672 |
| Axle | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Solid or vented type | Vented |
| Brake surface | Directional |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.020 in |
| Overall height | 2.406 in |
| Center hole diameter | 2.810 in |
| Stud/lug hole circle diameter | 4.75 in |
| Stud/lug hole quantity | 5 |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems, with no specific year, make, model or trim identified.
Installation notes
The rotor is directional, so confirm it is the right-side part before fitting it. It does not include an ABS tone ring. Brake work affects stopping performance, so have the rotor installed and tested by a qualified technician.
What’s included
One right-side rotor, sold as each.
Not included: ABS tone ring. Rotors are sold individually, so a pair requires two units.
