Overview
The Baer Brakes 54032-020 is a pair of rear Claw performance rotors for the 1995-2001 Ford Explorer, the 2001-2002 Ford Explorer Sport and the 1997-2001 Mercury Mountaineer. They are direct replacement rotors for the rear brake position, so they take the place of the factory rear discs on those models.
The slots and drilled holes give gas and dust an exit from the gap between pad and rotor during braking. This helps keep pedal feel consistent and reduces brake fade. The zinc-plated finish gives a bright look behind open-center wheels.
Key features
- Slotted and cross-drilled friction surface that lets gas and dust escape from between pad and rotor
- Enhanced vane structure and premium materials for cooling and durability
- Mill balanced, premium grade direct replacement rotor
- Chamfered cross-drilled holes intended to minimize stress cracking
- Zinc-plated finish for an appearance behind open-center wheels
- Solid rotor type with one-piece full cast construction
Before you buy rear rotors
Rear rotors work with the pads, the caliper bracket and the parking brake hardware, so they are usually replaced as part of a full rear brake service rather than alone. Worn pads run against an old rotor can leave an uneven surface that a new rotor will not correct, so pads should match the new friction face and seat correctly in the caliper.
Signs that rear rotors need attention include pulsing through the pedal, grinding, scoring you can feel with a fingertip, or a measured thickness below the discard figure. Slotted and cross-drilled faces help clear debris, but they can also wear pads faster, so bedding in carefully helps the pads lay an even layer of friction material onto the rotor.
- Replace pads together with the rotors
- Inspect caliper slide pins for smooth movement
- Clean the hub face before fitting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 54032-020 |
| UPC | 844165001881 |
| Position | Rear |
| Sold as | Set |
| Rotor type | Solid, one-piece full cast |
| Surface type | Slotted and cross-drilled |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Grade | Premium |
| Stud/lug hole quantity | 5 |
| Mounting bolt hole circle diameter | 114 |
| Outside diameter | 284.99 |
| Overall height | 58.42 |
| Discard thickness | 10.92 |
| Brake surface | Directional |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
Baer lists these rotors for the rear position of the 1995-2001 Ford Explorer, the 2001-2002 Ford Explorer Sport and the 1997-2001 Mercury Mountaineer. The drive types listed are RWD and 4WD.
The rotors fit the rear position of the 1995-2001 Ford Explorer, the 2001-2002 Ford Explorer Sport and the 1997-2001 Mercury Mountaineer, for RWD and 4WD drive types. The Explorer Sport fits 2001-2002 only. Front-axle rotors and Explorer or Mountaineer model years outside 1995-2002 are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are rear rotors, so the rear axle must be lifted and safely supported before removal. The ABS tone ring is not included, so check how your vehicle’s tone ring is arranged before you start. Brake work is safety-critical, so replace or inspect pads and rear hardware at the same time as the rotors.
What’s included
A pair of direct replacement rotors, sold as a set.
Not included: Brake pads, calipers and mounting hardware are not part of the set, and the ABS tone ring is not included.














