Overview
The Baer Brakes 6920217 is a right-side, two-piece vented replacement brake rotor with a 14 inch outside diameter and a 1.15 inch nominal thickness. Its surface is plain rather than slotted or drilled, and it has 12 mounting bolt holes on an 8.5 inch bolt circle. It is used in the Baer ES+2 system and select other Baer brake systems.
The rotor is directional and specific to the right side of the vehicle, so the left-side version is a separate part. Confirm the Baer system and hub size before choosing it.
Key features
- Purpose-built castings made from premium materials
- Curved vane design for better airflow through the rotor
- Engineered for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free performance
- Plain surface finish
- Directional brake surface for the right side
- Vented two-piece construction
Plain finish and pad contact
A plain friction face has no slots or drilled holes, so it has fewer channels for dust and gas to escape and relies more on the pad to clear debris. Plain rotors are often chosen for quieter pads and a smooth, even contact pattern. Because the face is solid, surface rust that forms overnight can cause brief pulsation until the pads clean it off.
Check the friction face for scoring, a raised lip at the outer edge, or blue discoloration from overheating, all of which point to a rotor that needs attention. Measure thickness at several points around the face if you are unsure, and compare it with the minimum thickness marked on the rotor. Keep the hub face clean and free of corrosion so the rotor sits true when mounted.
- Check for scoring or a lip on the outer edge
- Look for blue heat discoloration
- Keep the hub face clean and dry
- Replace pads with the rotor when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920217 |
| UPC | 844165012269 |
| Axle side | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Material | Cast iron |
| Surface type | Plain |
| Outside diameter | 14 in |
| Nominal thickness | 1.15 in |
| Mounting bolt holes | 12 |
| Mounting bolt hole circle diameter | 8.5 in |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. Match the 8.5 inch bolt circle and 14 inch diameter to your current hardware, because the plain finish does not change the mounting dimensions.
Installation notes
This rotor is directional, so confirm it is the right-side part before mounting. Check the 1.15 inch thickness against your caliper clearance and inspect the hub face before assembly, and have a qualified brake technician verify the installation.
What’s included
One right-side plain-finish rotor, sold as each.
Not included: the left-side rotor and any ABS tone ring, since the part details state no ABS tone ring is included.













