Overview
The Baer Brakes 6920336 is a right-side, 1-piece tall hat replacement brake rotor with a 12.000 inch outside diameter and a 1.100 inch nominal thickness. It has a slotted, drilled and zinc-plated friction face and is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
A brake rotor is the disc the pads clamp against, so its surface, balance and fit on the hub all shape braking feel. This rotor is a vented, full cast design in cast iron. Its 2.781 inch center hole locates it on the hub and its 5 x 4.50 inch stud pattern sets how it bolts up. The design is directional, so it is built for the right side of the vehicle only.
Key features
- Slotted and drilled friction face with a zinc-plated finish
- Curved vane ventilation intended to help cooling
- Castings made from premium materials for a purpose-built design
- Engineered for rotor stability and resistance to distortion
- Dynamic balanced for smooth running
- Directional surface specific to the right side
- Single-piece tall hat in full cast construction
Signs the rotor is worn
Rotors wear slowly, so the change often shows up as a gradual shift in braking feel rather than a sudden failure. Pulsing through the pedal, a shaking steering wheel, or a noticeable lip on the outer edge of the friction face are common signs that the disc is past its useful life. Scoring, heat cracks and uneven wear across the face are also reasons to inspect the rotor closely before the next trip.
Slotted and drilled faces add grip and help shed debris, but the openings also collect dust and can wear pads faster when used hard. Replacing pads at the same time as the rotor is a common practice, since a fresh rotor bedding against worn pads can produce uneven contact. Keep the old hub surface clean and free of rust before the new disc goes on, so it seats flat.
- Pulsation felt through the pedal or steering wheel
- Visible scoring, grooves or heat cracks on the face
- Uneven thickness or a raised lip at the outer edge
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920336 |
| UPC | 844165037170 |
| Axle side | Right |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.228 |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch |
| Center hole diameter | 2.781 inch |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The 6920336 is made for select Baer Brake systems. Match its 12.000 inch diameter, 1.100 inch thickness, 5 x 4.50 inch bolt pattern and 2.781 inch center hole to your brake hardware before ordering.
Confirm your vehicle’s year, model and trim before ordering. This right-side rotor cannot stand in for the left-side part on the same axle.
Installation notes
The rotor is directional and specific to the right side, so confirm the side before it goes on the hub. Rotors are sold individually, so a left-side rotor is a separate purchase when both sides need replacing. A slotted and drilled face calls for pads compatible with that surface. Brakes are safety-critical, so have the finished installation checked before the vehicle returns to the road.
What’s included
This is the replacement brake rotor only, sold individually.
Not included: The ABS tone ring is not included. Confirm the hub hardware your application needs before installation.
