Overview
The Baer Brakes 6929112 is a plain-finish, right-side, 1-piece replacement brake rotor with a 12.000 inch outside diameter and 1.020 inch nominal thickness. It is used in select Baer Brake systems and sold as each.
The plain friction face has no slots or drilled holes. The casting is vented, full cast and made of cast iron, with a drum in hat and a directional brake surface.
Key features
- Plain friction face with no slots or holes
- Vented casting with curved vanes
- Designed for stability and distortion resistance
- Dynamically balanced for smooth running
- The hat includes a drum
- Four studs on a 4.25 inch bolt circle
Plain faces and braking feel
A plain friction face has a continuous braking track, which tends to give a smooth, progressive pedal once pads are bedded in. Pad material spreads evenly across the surface, so the feel depends heavily on pad choice and on how clean and flat the face stays.
Keep the hub and hat seat clean, since a trapped particle or rust scale can cause runout and a pulsing pedal. Check for hot spots, blue discoloration and fine heat cracks after heavy stops, and store spare rotors flat so the braking face is not bent in storage.
- Clean the hub face before mounting
- Look for blue discoloration after heavy use
- Check the drum surface during each hat service
- Torque lug nuts evenly after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929112 |
| UPC | 90127962299 |
| Axle side | Right |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.406 |
| Stud/lug hole quantity | 4 |
| Stud/lug hole circle diameter | 4.25 inch |
| Register diameter | 2.780 inch |
| Center hole diameter | 2.78 |
| Material | Cast iron |
| Surface type | Plain |
| Solid or vented | Vented |
| Construction | Full cast, one piece |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Brake surface | Directional |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Check the 4 x 4.25 inch bolt pattern against your hub and confirm the right-side orientation before buying. Confirm fit for your vehicle’s year, model and trim first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brake surface is directional, so orient the part for the right side before installation. Rotor swaps change braking, so inspect the pads and hub at the same time.
What’s included
One right-side replacement rotor, sold as each.
Not included: the left-side rotor, pads and hub hardware are not part of this item.
