Overview
The Baer Brakes 6919113 is a left-side, 1-piece slotted replacement brake rotor with a 12.000 inch outside diameter and a 1.020 inch nominal thickness. It is a vented cast iron rotor for select Baer Brake systems, and its directional brake surface makes it specific to the left side of the vehicle.
The casting is purpose built, with a curved vane design for cooling and dynamic balancing for vibration-free running. Rotors are sold individually, so a matching right-side rotor is needed for a pair.
Key features
- One-piece full cast construction in cast iron
- Curved vane design intended for optimum cooling
- Slotted surface finish
- Directional brake surface for left-side installation
- Designed for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- Drum in hat design
Buying for both sides
Left and right rotors are sold separately, so a full brake job on one axle usually means buying two rotors. Compare diameter, thickness, bolt pattern and hat design across both sides before ordering. Replacing both rotors together helps keep braking even from side to side, especially when the other side shows similar wear.
Check the hub surface, wheel studs and bearing play while the wheel is off, since a rotor cannot seat properly on a damaged hub. Clean the hub face and remove any rust or burrs before fitting. Slotted rotors pair best with pads rated for slotted surfaces, and a quick check of the caliper slide pins helps the new pads move freely. Torque fasteners to the vehicle’s specification and recheck them after the first few drives.
- Order both sides for even braking
- Clean the hub face before fitting
- Confirm the ABS tone ring need before ordering
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919113 |
| UPC | 90127961452 |
| Axle side | Left |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.02 in |
| Overall height | 2.406 in |
| Stud/lug hole circle diameter | 4.25 in |
| Stud/lug hole quantity | 4 |
| Center hole diameter | 2.78 in |
| Register diameter | 2.780 in |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Slotted |
| Brake surface | Directional |
| Solid or vented | Vented |
| Grade type | Performance |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems, and its directional brake surface makes it specific to the left side. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and left-specific, confirm the side before fitting it. The ABS tone ring is not included with this rotor, so check whether your hub setup requires one.
What’s included
One left-side 1-piece slotted replacement brake rotor, sold as each.
Not included: The right-side rotor and the ABS tone ring.
