Overview
The Baer Brakes 05357-020 is a front Claw performance rotor set for the 1994–1999 Dodge Ram 1500 2WD. Each direct replacement rotor is a conventional, vented, one-piece cast iron design with a cross-drilled and slotted friction face, supplied as a set of two.
The face vents gas and dust from between pad and rotor, a feature Baer credits with steadier pedal feel and reduced brake fade. The zinc-plated surface and rust-resistant coating are meant to hold a bright look behind open-center wheels, and the set suits owners of 1994 through 1999 Ram 1500 trucks who want slotted and drilled fronts.
Key features
- Cross-drilled and slotted face that moves gas and dust out from the pad interface
- Conventional vented rotor design with a one-piece full-cast body
- Vane structure and premium materials for cooling and long wear
- Chamfered cross-drilled holes that minimize stress cracking
- Rust-resistant coating over a zinc-plated finish
- Mill balanced, direct-replacement rotor with a directional surface
Choosing the right setup
Front rotors work as one part of the braking system, so the hub face, wheel bearings and caliper need to be in good order before new rotors go on. A rust film or raised ridge on the hub can cause the new rotor to sit off true and produce vibration.
When choosing pads, match the friction material to how the truck is used. Heavier loads and towing put more heat into the rotors, so pad choice affects how quickly rotor wear shows. Replacing the pads at the same time as the rotors is a common practice.
- Clean the hub face and remove any rust before mounting
- Check caliper slide pins for free movement
- Tighten lug nuts in a star pattern
- Re-check torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 05357-020 |
| UPC | 844165002956 |
| Sold as | Set |
| Axle | Front |
| Drive | 2WD |
| Rotor type | Vented, conventional, one-piece full cast |
| Surface type | Slotted and drilled |
| Brake surface | Directional |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Rust resistant coating | Yes |
| Grade type | Premium |
| Outside diameter | 11.61, 295 |
| Overall height | 4.51, 114.5 |
| Nominal thickness | 1.29, 32.7 |
| Discard thickness | 1.21, 30.86 |
| Center hole diameter | 3.09, 78.5 |
| Stud/lug hole circle diameter | 139.7, 5.5 |
| Stud/lug hole quantity | 5 |
| ABS tone ring included | Yes |
| Country of origin | CN |
Vehicle fitment
Listed fitment covers the front rotors of 1994–1999 Dodge Ram 1500 trucks, which the set describes as 2WD.
Ram 1500 models made after 1999, other Ram sizes and 4WD trucks are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors are directional, so check rotation orientation against the face marking before mounting. The ABS tone ring is included. Replace fronts in pairs and clean the hub face so each rotor sits flat. Verify pad and caliper clearance on the new rotors before the first drive.
What’s included
A pair of direct replacement front rotors.
Not included: Pads and other friction hardware are not included in this set.
