Overview
The Baer Brakes 6920549 is a right-side, two-piece replacement brake rotor with a plain friction surface, made for select Baer Brake systems. Its listed dimensions are 14 inches outside diameter, 1.025 inches nominal thickness and 12 bolt holes on a 9.9 inch bolt hole circle.
The casting is purpose built from premium materials and dynamically balanced for smooth operation. The rotor is directional and tied to one side of the vehicle, so this right-side part belongs on the right wheel only, and the opposite side needs its own rotor.
Key features
- Plain surface finish.
- Two-piece construction with a cast iron ring
- Vented design with curved vanes
- Castings are purpose built from premium materials.
- Dynamically balanced
- Directional, right-side application
Replacing brake rotors
Brake rotors are the metal discs the pads clamp against to slow the wheel. Over time the friction face wears, develops grooves or heat checks, and can lose thickness until it no longer meets the minimum the rotor was cast to. When a rotor is replaced, the pads are usually replaced at the same time so the new surface bears evenly against fresh friction material. Rotors are often replaced in pairs on the same axle so braking force stays balanced from side to side.
For a directional rotor, the side matters. Mount it on the wheel it is marked for and keep the hub face clean and free of rust before fitting. Hub hardware, wheel bearings and the caliper bracket should be inspected at the same time, since a worn bearing or loose bracket can cause runout and pulsing even when the rotor itself is sound. Check that the caliper slides freely and that the rotor spins without drag after installation.
- Measure rotor thickness against the minimum stamped on the old part before mounting
- Clean the hub face and remove any rust or burrs
- Replace pads together with the rotor
- Bed in new pads gradually after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920549 |
| UPC | 844165012429 |
| Construction | Two piece |
| Material | Cast iron |
| Outside diameter | 14 in |
| Nominal thickness | 1.025 in |
| Bolt hole circle diameter | 9.9 in |
| Bolt hole quantity | 12 |
| Surface type | Plain |
| Rotor style | Vented |
| Brake surface | Directional |
| Axle | Right |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Part 6920549 is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
This is the right-side rotor only; other Baer systems and the left-side unit are separate. Review Baer Brakes’ published specifications for your system first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the side before mounting, since the directional rotor is made for the right wheel. Verify the 12-hole, 9.9 inch bolt circle against the hub. Because brake parts are safety-critical, ask a qualified technician to inspect the finished job and advise on pad break-in.
What’s included
The package holds one right-side rotor with a plain surface.
Not included: A left-side rotor, brake pads and any hub hardware.
