Overview
The Baer Brakes 4262189S is a silver rear Pro Plus brake system kit for Ford 9 inch rear axles with early big bearing housing ends and a 5×5.00 bolt pattern. A 6-piston fixed caliper clamps a 14.0 inch, 2-piece rotor, and the backing plate carries a one-piece park brake shoe assembly for parking duty at the rear.
The minimum wheel diameter is 18.0 inch, and the 14 inch rotor fits most 18 inch or larger wheels. Wheel fit varies by design, so run the Q082P template against the wheel you intend to use. The caliper is manufactured in Phoenix, Az.
Key features
- Silver powder coated 6-piston caliper of fixed design
- Stainless pistons, abutments and noise suppression clips
- Staggered piston arrangement aimed at minimizing uneven pad wear
- Dual seals covering dust, weather and pressure
- CNC machined components made from US-sourced forged or billet aluminum
- Two-piece slotted, drilled and zinc-plated rotor on a billet aluminum hat
- High grade NAS stainless hardware arrives pre-assembled with the rotors
- D0731 pad type with FMSI number listed
Wheel clearance and offset
Wheel offset and backspacing decide whether a rear caliper and rotor sit cleanly behind the spokes. A wheel with the wrong offset can rub the caliper body or pinch the hose, so measure the inside clearance before the tire is mounted. Tire width and sidewall height also change how much room the caliper has at full steering lock.
Larger rotors need more clearance, so confirm the wheel opening fits the rotor hat and the caliper bracket before final assembly. Re-check the lug nut seat and torque after the first short drive, since new wheels and hardware often settle slightly.
- Measure inside clearance with the wheel mounted
- Check caliper body clearance at full steering lock
- Re-torque lug nuts after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262189S |
| UPC | 844165037071 |
| Caliper | 6-piston (6P), fixed, silver |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Minimum wheel diameter | 18.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Axle flange | Ford 9 inch early big bearing |
| Pad FMSI number | D0731 |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Grade | Performance |
| Park brake included | Yes |
| Park brake cables included | No |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
No vehicle years, models or chassis codes are attached to this kit. It is built for Ford 9 inch rear axles with early big bearing housing ends and a 5×5.00 bolt pattern, so confirm those measurements on your own axle. Check the Q082P template against your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are sourced separately because they are not part of this kit. The 2-piece rotor and its billet hat come assembled. Chock the front wheels and use jack stands before starting rear work.
What’s included
The kit includes the silver 6-piston caliper and backing plate, the one-piece park brake shoe assembly, the 2-piece rotor with stainless hardware, and braided hoses with hardware.
Not included: park brake cables, lug nuts and the front rotor.















