Overview
The Baer Brakes 4262257S is a silver SS4 Plus rear brake package intended for four-lug Ford 8.8 rear axles that carry a 2.5 inch standoff. The S4 caliper is silver and clamps a 13 inch two-piece rotor with slot, drill and zinc-plate finishing over an aluminum hat.
Owners running a four-lug Ford 8.8 rear who want a bigger rear brake will find the layout relevant. The park brake shoe is a one-piece assembly housed in the backing plate, which also carries the caliper. Stainless braided hoses come with the set. Four lug nuts and park brake cables are not included and must be sourced from another vendor.
Key features
- Silver S4 four-piston caliper with a floating design
- Two-piece slot, drill and zinc-plate rotor with a billet aluminum hat
- Integrated one-piece park brake shoe in the backing plate
- Dual seals protecting against dust, weather and pressure
- CNC machined aluminum caliper body from forged or billet aluminum, manufactured in Phoenix, Az
- Hard anodized pistons with stainless abutments and noise suppression clips
Park brake use and adjustment
The park brake shoe in this kit sits inside the backing plate, so its adjustment and cable path are part of the rear unit. A shoe that drags when released can overheat the drum surface and wear the lining unevenly. Work the park brake lever through its full travel after installation and confirm it releases cleanly.
Park brake cables are a separate purchase and wear over time. Look for fraying, rust at the ends and sticking in the housing. A cable that does not return fully can keep the shoe in contact, so replace it when it binds. Lubricate the pivot points on the lever where the design allows.
- Confirm the lever releases fully after each adjustment
- Inspect cables for fraying and rust
- Keep grease away from the friction surfaces
- Recheck fasteners after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262257S |
| UPC | 844165028116 |
| Caliper | S4, four-piston, floating, silver |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor type | Two-piece, vented, iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Pad type (FMSI) | DR1-C |
| Lug count | 4 lug |
| Wheel bolt pattern | 4×4.25 |
| Axle flange | Ford 8.8 inch |
| Minimum wheel diameter | 17.0 inch |
| Hose material | Steel braided |
| Park brake | Included |
| Template | S135H |
| Country of origin | US |
Vehicle fitment
It is built for Ford 8.8 inch rear axles with a Ford axle flange, a 2.5 inch axle standoff and a 4×4.25 bolt pattern. Confirm those measurements on your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors arrive already assembled with their hardware, so no separate rotor build is needed. Compare the S135H template with a wheel of 17 inch or larger before mounting, since wheel designs vary. Test the pedal and park brake after bleeding the lines.
What’s included
Silver S4 calipers, two-piece 13 inch rotors, the park brake shoe assembly, stainless braided hoses and stainless hardware come in the set.
Not included: You will need to get park brake cables and four lug nuts from elsewhere.















