Overview
The Baer Brakes Pro Plus 14.0 Inch Brake System, part number 4261217B, is a complete front disc brake kit with a six-piston black caliper for 1970 to 1974 Ford and Mercury cars that keep the original drum brake spindle. It fits the Ford Fairlane, Falcon, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
The kit is sold as a kit and includes the front rotor. It pairs a 14-inch two-piece vented rotor with billet aluminum hubs and a fixed six-piston caliper, which replaces the stock drum brakes while the factory spindle stays in use. Mounting brackets, stainless braided hoses and hardware are included, but lug nuts are not.
Key features
- Six-piston fixed caliper with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Two-piece vented rotor with iron body and aluminum hat, slotted, drilled and zinc plated
- Billet aluminum hubs with premium bearings packed with Redline synthetic grease and billet dust caps
- Rotors pre-assembled with NAS high grade stainless hardware
- Dual seals for dust, weather and pressure
- Powder coated finish; caliper CNC machined from U.S.-sourced forged or billet aluminum
- Pad type FMSI D0731
Before you buy
A drum-to-disc conversion changes how the front end works, so check the rest of the setup before ordering. Disc brakes often run different pedal feel and fluid demand than the factory drum system, so a conversion like this pairs well with a brake fluid and hose check across the whole vehicle. Wheel choice matters too, because a larger rotor and caliper need enough room inside the wheel to clear the caliper body and hub face. Suspension and steering parts near the front hub should be inspected for clearance once the hubs are on.
Worn drum shoes, scored drums and a soft pedal all point to a front system that is due for replacement, and those are the same symptoms a disc upgrade addresses. Once the front disc side is in place, the rear drums may leave the braking balance off, so bias should be considered during the first test drives. Pads and fluid should be checked on a regular schedule, and the hub bearings should be inspected for play during routine service.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261217B |
| UPC | 844165021407 |
| Caliper | 6-piston, 6P, fixed |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | Two-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Brake pad FMSI number | D0731 |
| Minimum wheel diameter | 18.0 inch |
| Wheel bolt pattern | 5 lug, 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Brake hose | Steel braided, DOT approved |
| Template | Q082P |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | US |
| Front rotor included | Yes |
| Lug nuts included | No |
Vehicle fitment
It fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego, all with the original drum brake spindle.
Mustangs and Cougars from 1974, and Torinos from 1972 on, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is for cars with the OE drum brake spindle only, so confirm the spindle is in place before mounting the hubs. Compare the Q082P wheel template to your wheel, since fit to every wheel style is not guaranteed. Have a qualified technician install and test the brake system.
What’s included
- Six-piston caliper
- Two-piece front rotor, pre-assembled with NAS high grade stainless hardware
- Billet aluminum hubs with bearings and billet dust caps
- Mounting brackets
- Stainless braided hoses and hardware
Not included: lug nuts.














