Overview
The Baer Brakes 4262148R is a red Pro Plus 13.0 inch rear brake kit for Ford 9 inch rear axles that use the early big bearing housing flange and a 5×4.50/5×4.75 wheel bolt pattern. The kit is built around a 6-piston fixed caliper and a two-piece slotted, drilled, zinc plated rotor, and it ships as one complete rear system.
Baer positions the Pro Plus line in its Performance grade for owners upgrading rear braking hardware. The caliper mounts to Baer’s backing plate, which also contains a one-piece park brake shoe assembly, so the parking brake is part of the same rear unit. The pad type used with this kit is D0731.
Key features
- Six-piston 6P fixed caliper in a powder coated red finish, machined from US sourced forged or billet aluminum.
- Stainless pistons, abutments and noise suppression clips.
- Staggered piston layout to limit uneven pad wear.
- Dual seals rated for dust, weather and pressure.
- Two-piece slotted, drilled and zinc plated rotor with a billet aluminum hat.
- Integrated park brake shoe assembly in a one-piece design.
- Stainless braided hoses and hardware included.
Caring for the red finish
The red powder coat on the caliper is a protective layer, and it holds up best with routine cleaning. Brake dust can build up along the caliper body, so rinse it off with mild soap and water during regular wheel cleaning. Heat from repeated stops can discolor paint near the pistons, which is normal for a caliper working under load.
Stainless braided hoses should be checked along their length for chafing, bulges or weeping at the fittings. Brake fluid absorbs moisture over time, so a regular fluid change keeps the hydraulic system performing consistently. Rotor surfaces should be inspected for scoring whenever the pads are changed.
- Rinse brake dust with mild soap and water
- Avoid acidic wheel cleaners on the caliper
- Inspect braided hoses for chafing or leaks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262148R |
| UPC | 844165036258 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Caliper | 6P, 6-piston fixed |
| Caliper color | Red |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Pad type (FMSI) | D0731 |
| Hose material | Steel braided, DOT approved |
| Park brake included | Yes |
| Park brake cables included | No |
| Minimum wheel diameter | 17.0 inch |
| Emission code | 6 |
| Template | Q082H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch Early Big Bearing rear housings with a 5 lug, 5×4.50/5×4.75 bolt pattern, and it is intended for wheels of 17 inch minimum diameter or larger.
Use template Q082H to test wheel clearance before buying. Before ordering, match the year, model and trim to your vehicle.
Installation notes
Rotors come pre-assembled with stainless hardware, so no rotor assembly is needed on arrival. The stainless braided hoses are supplied with the kit. Park brake cables are not supplied and must be obtained separately. Check the wheel bolt pattern and clearance against the template first. Brake work should be done by a qualified mechanic.
What’s included
Rear 13.0 inch two-piece rotors with stainless hardware, 6P fixed calipers, the backing plate with park brake shoe assembly, and stainless braided hoses and hardware.
Not included: front rotors, park brake cables and lug nuts.















