Overview
The Baer Brakes Pro Plus 14.0 inch front disc brake kit, part number 4261217GB, in Grabber Blue, is a 6-piston front system for 1970–1974 Ford and Mercury cars that use OE drum brake spindles. The 14 inch rotor is a vented, two-piece design with slotted, drilled and zinc plated faces.
Baer applies this kit to the Ford Falcon (1970), Ford Torino (1970–1971), Mercury Montego (1970–1971), Mercury Cyclone (1970), Ford Fairlane (1970), Ford Mustang (1970–1973), Mercury Cougar (1970–1973), Mercury Comet (1971–1974) and Ford Maverick (1970–1974).
Key features
- 14.0 inch vented front rotor, two-piece, slotted and drilled
- Grabber Blue powder coated finish
- Six-piston 6P fixed caliper with stainless pistons
- Staggered pistons for more even pad wear
- Billet hubs with premium bearings packed with Redline synthetic grease
- Dual seals that handle dust, weather and pressure
- Stainless noise suppression clips
- Rotors pre-assembled with NAS high grade stainless hardware
Pad bedding and first drives
New pads and rotors need a short bedding-in period before they reach full braking performance. Gentle, repeated stops transfer an even layer of pad material onto the rotor faces, which keeps the braking feel consistent and reduces the chance of vibration.
Hubs with packed bearings should be checked for heat and play after the first drives. Light grease on the hub and a snug, correct torque on the wheel fasteners help the setup stay quiet and stable. Any change in pedal feel, pulling or noise is worth investigating before normal driving resumes.
- Make several moderate stops from modest speed before hard braking
- Let the brakes cool between bedding runs
- Feel the hub for excess heat after a drive
- Recheck wheel fastener torque once the car has settled
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261217GB |
| UPC | 90127903049 |
| Sold as | Kit |
| Caliper color | Grabber Blue |
| Caliper | 6-piston (6P), fixed |
| Rotor diameter | 14.0 inch |
| Rotor construction | Vented, two-piece |
| Rotor thickness | 1.15 |
| Rotor surface | Slotted, drilled and zinc plated |
| Hub material | Billet aluminum |
| Brake pad FMSI number | D0731 |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18.0 inch |
| Axle | Front |
| Brake hose | Braided, DOT approved |
| Template | Q082P |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
It fits the 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego. Each one uses OE drum brake spindles.
Not covered: the Ford Torino and Mercury Montego from 1972, the Mercury Cougar for 1974, the Mercury Cyclone after 1970, the Ford Mustang for 1974 and later, and the Mercury Comet for 1970. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hubs come assembled with bearings already packed with Redline synthetic grease. Use the Q082P template to check clearance against your wheel, because Baer cannot guarantee fit into every wheel style. Brakes are safety critical, so a qualified installer should test the assembly before road use.
What’s included
Grabber Blue caliper and 14 inch rotor assemblies, billet aluminum hubs with bearings, pre-assembled rotors, mounting brackets, braided brake hoses and hardware.
Not included: wheels and tires.
