Overview
The Baer Brakes SS4 Plus Dual Deep Stage rear brake kit, part number 4262698FR, uses four S4 four-piston calipers on 11-inch two-piece rotors for Ford 8.8 inch rear axle flanges. It is finished in Fire Red and is meant for axles that use C-clip eliminators, because the kit will not work with C-clip axles.
The SS4 Plus Deep Stage is built for heavy, fast cars that may also be driven on the street. It suits wheels 15 inches and larger, with a minimum wheel diameter of 15.0 inch. The axle flange and C-clip eliminator setup are the main points of compatibility.
Key features
- Four S4 calipers, each with 4 pistons, manufactured in Phoenix, Arizona
- 1.75 inch pistons in hard anodized aluminum, with stainless steel abutments
- Powder-coated finish
- High friction pads designed for drag race applications come standard
- Billet aluminum hats drilled for 5/8 inch wheel studs
- 2-piece slotted, drilled, zinc-plated vented rotors
- Rotors pre-assembled with NAS high grade stainless hardware
Drag and street use
Drag brake systems run hot in short bursts and need pads that handle that heat without losing grip. High friction pads help with launches and repeated stops, but they also send more heat into the rotors and calipers, so cooling time between runs matters.
Street use changes the picture. Cold pads and rotors may grip less at low speed, and some friction compounds make more noise or dust on the street than on the strip. Plan the hose routing before mounting, since hoses are not included, and keep the park brake setup separate from the service brakes.
- Let the brakes cool between runs
- Check the C-clip eliminator hardware at each service
- Inspect rotor hats for heat cracks after hard use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262698FR |
| UPC | 844165050742 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 8.8 inch |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Fire Red |
| Piston size | 1.75 inch |
| Pad type (FMSI) | DR1 (HB100 also referenced) |
| Friction material | Semi-metallic |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Park brake | Not included |
| Hose material | Hoses not included |
| Lug count | 4 lug |
| Wheel bolt pattern | 4×4.25 |
| Minimum wheel diameter | 15.0 inch |
| Template | S125A |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
Fitment depends on the axle flange and C-clip setup rather than the vehicle year or model. The kit is built for a Ford 8.8 inch axle flange and requires C-clip eliminators, so it does not work on C-clip axles. Confirm fit for your axle flange and C-clip setup before ordering.
Compatibility depends on the axle and its setup, not only the model name, so a make, model and year alone do not confirm fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake hoses are not included, so plan the hose routing before the calipers are mounted. The C-clip eliminators must be in place on the axle, and the S125A template is the reference for checking the wheel fit.
What’s included
- Four S4 4-piston calipers with 1.75 inch pistons
- 11.0 inch 2-piece vented rotors with billet aluminum hats
- Rotors pre-assembled with stainless hardware, plus mounting hardware
- High friction pads designed for drag race applications
Not included: Brake hoses, the park brake, and C-clip eliminators, which are required for this kit.















