Overview
The Baer Brakes 4262321C is an SS4 Plus Deep Stage rear brake kit for the Ford 9 inch rear axle with Torino (late big) bearing housing ends. It is a single-set drag race rear brake system built around two S4 4-piston calipers and 11.0 inch 2-piece slotted, drilled rotors, made for heavy, fast cars that may also see street use.
The Deep Stage is Baer’s first drag race system built for heavy, fast cars, scaled down to fit wheels 15 inch and larger. The kit comes with high friction pads for drag race use and the popular DR1 or HB100 pad type, and the calipers are manufactured in Phoenix, AZ. The axle flange must be 5.75 inch.
Key features
- Two 4-piston S4 calipers with 1.75 inch pistons in a clear powder coated finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- 2-piece slotted, drilled, zinc-plated rotors on billet aluminum hats
- Hats drilled for 5/8 inch wheel studs
- High friction pads designed for drag race applications
- Rotors pre-assembled with NAS high grade stainless hardware, plus included mounting hardware
- Dust and weather seals are included
Heat and brake fade
Drag brakes work hard in short bursts, and most of the heat from a stop goes into the rotors and pads. Rotors that run hot can lose friction, which is why pad compound and rotor mass both matter on a rear brake system. Slotted and drilled rotors help shed gas and debris, but they do not replace good pad selection for the conditions you run.
On a rear axle the brakes share the work with the front brakes, so balance matters. A heavier car with a rear-only upgrade will load the rear brakes more than stock, and that is worth weighing when choosing pads and a front setup.
- Match pad material to your typical use
- Confirm rotor clearance inside the wheel
- Bleed the system after any hose or caliper work
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262321C |
| UPC | 844165038412 |
| Caliper | S4, fixed, 4-piston |
| Calipers included | 2 |
| Caliper color | Clear |
| Piston size | 1.75 inch |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Required axle flange | 5.75 inch |
| Friction material | Semi-metallic |
| Pad FMSI number | DR1 |
| Template | S125A |
| Park brake | Not included |
| Hoses | Not included |
| Front rotor | Not included |
| Country of origin | US |
Vehicle fitment
It is built for the Ford 9 inch rear axle with Torino (late big) bearing housing ends and needs a 5.75 inch axle flange, so match the housing first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come pre-assembled with stainless hardware, so the main work is confirming the 5.75 inch axle flange and obtaining brake hoses separately. The kit has no park brake, so plan a separate parking solution. Brake work affects stopping performance, so have the installation checked before the car is driven.
What’s included
Two S4 rear calipers with 1.75 inch pistons, 11.0 inch 2-piece slotted, drilled rotors with billet aluminum hats, high friction pads, dust and weather seals, and mounting hardware, with the rotors pre-assembled using stainless hardware.
Not included: lug nuts, brake hoses, a front rotor, and a park brake.















