Overview
The Baer Brakes 4262685FR is a dual deep stage rear brake kit for GM small pattern 10/12 bolt bearing-on-axle housing ends, aimed at drag racing and heavy, fast cars that may also see street use. It carries four 4-piston S4 calipers on 11 inch two-piece slotted and drilled rotors, sized for wheels 15 inch and larger.
Baer Brakes built the SS4 Plus Dual Deep Stage around a smaller package than its larger brake systems, so the same caliper design can clear 15 inch wheels. Each caliper uses 1.375 inch pistons, and the kit uses the DR1 or HB100 pad type with high friction pads designed for drag race use. The kit is manufactured in Phoenix, Az.
Key features
- Four S4 calipers, each with a 4-piston design and 1.375 inch pistons
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Two-piece rotors, slotted, drilled and zinc plated, with an iron rotor and aluminum hat
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Rotors pre-assembled with NAS high grade stainless hardware
- Powder coated Fire Red calipers
- High friction pads designed for drag race applications
Drag rear brake upkeep
Rear disc brakes on a drag car handle heavy loads during repeated hard launches and stops, so the hub, bearing surface and axle flange should be inspected before the brakes go on. Look for scoring, cracks and uneven wear on the flange face. Dual caliper rear setups put more clamping force through the same mounting points, which makes solid hardware and clean contact surfaces important.
High friction pads run hot and wear faster than street compounds, so check pad thickness and rotor condition after each session. Brake fluid absorbs moisture over time, and heat from repeated runs can shorten its useful life, so a regular fluid change keeps the pedal firm. Replace hoses that show cracking, bulges or soft spots.
- Check bearing surfaces and flange faces before each install
- Inspect rotor faces for heat checking and deep grooves
- Re-torque mounting hardware after the first few runs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262685FR |
| UPC | 844165049104 |
| Sold as | Kit |
| Caliper | S4, 4-piston, fixed, Fire Red, 4 calipers |
| Piston size | 1.375 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor type | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Pad type | DR1 or HB100, semi-metallic friction material |
| Axle flange | GM small pattern 10/12 bolt bearing on axle (Buick/Olds/Pontiac) |
| Axle flange dimension | 5.75 inch |
| Bearing | 3.150 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 15.0 inch |
| Template | S125A |
| Emission code | 6 |
| Park brake | No |
Vehicle fitment
It is built for GM small pattern 10/12 bolt bearing-on-axle housing ends with a 5.75 inch axle flange, so the axle housing determines fit rather than the vehicle name. Confirm fit for your vehicle’s year, model and trim before ordering.
Ford axle flanges, including C-clip eliminator and small bearing designs, are different and are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the axle flange first, since this kit needs a 5.75 inch flange. Rotors arrive pre-assembled with NAS high grade stainless hardware, and mounting hardware is included. Brake hoses are not supplied, so plan hose fitment before assembly. Drag brake kits like this are best installed by someone experienced with high-performance rear brake setups.
What’s included
The kit includes four S4 calipers with 1.375 inch pistons, two-piece rotors pre-assembled with stainless hardware, DR1 or HB100 pads, dust and weather seals, and mounting hardware.
Not included: the front rotor, lug nuts, brake hoses and any park brake.















