Overview
Red Baer Brakes Extreme Plus 14 inch rear brake kit, part number 4262098R, is built for the Ford 9 inch rear axle with Torino (late big) bearing housing ends and a 5×5.00 bolt pattern. The monoblock caliper is a one-piece six-piston unit, designated 6S, that clamps a 14-inch two-piece slotted, drilled and zinc-plated rotor. The kit is intended for wheels of 18 inches and up.
Baer designed the backing plate to be both the caliper mount and the housing for a one-piece park brake shoe assembly, which brings the parking brake into the rear package. Rotors come pre-assembled with NAS high grade stainless hardware. The pad type is D1247 and the matching template is N085P.
Key features
- Monoblock six-piston caliper with stainless steel pistons and noise suppression clips
- Staggered pistons to reduce uneven pad wear
- Dual seals rated for dust, weather and pressure
- CNC machined from US sourced 2618 aluminum forging
- Slotted, drilled and zinc-plated two-piece rotor with billet aluminum hat
- Powder coated red caliper finish
- Park brake shoe assembly housed in the backing plate
Pads, rotors and wear
Pad material and rotor surface work as a pair, so a new caliper performs best when the rotors are matched and the pads are bedded properly. Slotted and drilled rotors help clear debris and gas, but the slots also wear pad material faster in some driving conditions. Rotor thickness should be measured against the minimum stamped on the hat or listed in the service data for the vehicle before reusing a disc.
Trail and towing use place more heat into the rear brakes than normal road driving. Heat cycles can cause warping, blue spots and pad glazing, all of which lead to vibration or reduced stopping force. A simple inspection after each season or heavy use shows whether the pads, rotors and hoses need attention before a fault shows up on the road.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262098R |
| UPC | 844165036036 |
| Sold as | Kit |
| Caliper | One-piece monoblock, six-piston (6S), fixed |
| Caliper color | Red |
| Rotor outside diameter | 14.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.25 |
| Pad type | FMSI D1247 |
| Template | N085P |
| Lug count | 5 |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Hose material | Stainless steel |
| Park brake | Included; park brake cables not included |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
No vehicle list is published for 4262098R. The kit is matched to Ford 9 inch rear axles with Torino (late big) bearing housing ends, so measure or confirm the housing type on your axle before ordering. Use template N085P to check wheel clearance.
Ford small bearing 9 inch housings are a separate flange and are not covered. Baer cannot promise a fit with every wheel style, so verify your wheel against the template. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front rotors, lug nuts and park brake cables are excluded from this kit and need to be sourced separately. Raise and secure the vehicle properly before removing any rear brake hardware.
What’s included
The kit covers the rear six-piston monoblock caliper, the 14.0 inch two-piece rotors with pre-assembled stainless hardware, the backing plate with its park brake shoe assembly, and braided hoses with hardware.
Not included: front rotors, lug nuts, and cables for the park brake.















