Overview
The Baer Brakes SS4 Plus in black, part number 4262689B, is a rear disc brake kit for Ford 9 inch early Big Bearing axle housings that use a 5 on 4.5 and 4.75 inch bolt circle. Each kit centers on an S4 four-piston caliper clamping an 11.0 inch two-piece slotted and drilled rotor with zinc plating.
Baer pairs the calipers with the DR1-C pad type and describes them as CNC machined from US sourced forged or billet aluminum, finished in powder coat. Because the bracket and flange fit is specific to the early Big Bearing housing, verify that flange before mounting.
Key features
- Black S4 four-piston caliper with stainless steel abutments and noise suppression clips.
- Hard anodized aluminum pistons inside the four-piston caliper body.
- Dual seals for dust, weather and pressure.
- Slotted, drilled and zinc plated two-piece rotor with a billet aluminum hat.
- High grade stainless hardware comes pre-installed on the rotors.
- Brackets, braided stainless hoses and fasteners are all included.
- Sized for most wheels 15 inch and larger, according to Baer’s product details.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262689B |
| UPC | 844165051329 |
| Sold as | Kit |
| Caliper | S4, four-piston, fixed |
| Caliper color | Black |
| Caliper pistons | Hard anodized aluminum |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Pad type (FMSI) | DR1-C |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 Lug |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Minimum wheel diameter | 15.0 inch |
| Brake hose | Steel braided, DOT approved |
| Park brake | No |
| Template | S125A |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
This kit has no vehicle year, model or trim fitment listed. Its only axle reference is the Ford 9 Inch Early Big Bearing flange, so confirm that your rear axle housing matches before mounting; the manufacturer’s specifications are the place to check.
Housings without the early Big Bearing flange, and bolt patterns other than 5×4.50/5×4.75, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors come assembled with their stainless hardware, so no rotor assembly is needed on the bench. Run the S125A template against the wheels you plan to use, since fit depends on the wheel style. Brakes are safety equipment, so a qualified technician should complete the install and bleed procedure.
What’s included
Black S4 four-piston calipers, two-piece rotors pre-assembled with stainless hardware, mounting brackets, stainless braided hoses and the hardware set.
Not included: Lug nuts, the front rotor and any park brake components.















