Overview
Baer Brakes 4141022CY is the Comp Yellow version of the Extreme Plus front brake system for Dodge and Ram 1500 trucks. A 6S caliper with 6 pistons, built as a 1-piece Monoblock, clamps a 15 inch, 2-piece, vented rotor that is slotted, drilled and zinc plated.
The kit fits 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic. The Classic Body carries the 19-24 note, and the kit uses the D1247 pad type. The country of origin is USA.
Key features
- 6-piston 1-piece Monoblock 6S caliper, manufactured in Phoenix, Az
- Caliper machined from 2618 aluminum forging and powder coated
- Stainless steel pistons, abutments and noise suppression clips
- Staggered piston layout to minimize uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Vented 2-piece rotor, slotted and drilled, zinc plated, with billet aluminum hat
Rotor wear and replacement
A vented rotor takes most of the heat from the front brakes, so its condition shapes how the whole system feels. Watch for a pulsing pedal under light braking, a vibration through the steering wheel, or a rotor face that shows heavy scoring or blue heat marks. Any of these signs means the rotor should be measured and, when it is below the minimum thickness, replaced.
Rotors are usually replaced in pairs so both front sides wear and brake the same way. Clean the hub face and remove any rust before fitting a new rotor, and check runout with a dial indicator if the pulsing returns after the pads are replaced. Slotted and drilled faces help shed gas and water, but they also wear the pads faster, so inspect both components together at each brake service.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4141022CY |
| UPC | 90127939390 |
| Axle | Front |
| Caliper | 1-piece Monoblock, 6S |
| Caliper piston quantity | 6 |
| Caliper type | Fixed |
| Caliper color | Comp Yellow |
| Caliper body material | 2618 aluminum forging, CNC machined |
| Piston material | Stainless steel |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor construction | Vented |
| Rotor type | 2-Piece |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor hat | Billet aluminum |
| Pad type (FMSI) | D1247 |
| Template | N118U |
| Minimum wheel diameter | 19.0 inch |
| Wheel bolt pattern | 5×139.7mm |
| Lug count | 5 lug |
| Hose material | Re-uses OE hoses |
| Grade | Performance |
| Country of origin | USA |
Vehicle fitment
Fits 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic models. Ram 2500 and 3500 heavy-duty models are not covered by this fitment.
Ram 2500 and 3500 heavy-duty models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pre-assembled rotors use NAS high grade stainless fasteners, and mounting brackets and hardware are part of the package. Factory hoses are re-used. The 15 inch rotor is sized for wheels of 19 inch and up, with a 19.0 inch minimum wheel diameter. Check the N118U template against your wheel first.
What’s included
The kit includes the Comp Yellow 6S caliper, the pre-assembled 2-piece rotor, and the mounting brackets and hardware.
Not included: Brake pads. Only the D1247 pad type is named, so pads are not part of the listed items.
