Overview
The Baer Brakes 4262654S is an SS4 rear brake system with a park brake, made for Ford 8 inch and 9 inch small bearing housing rear ends that use a 5×5.00 bolt pattern.
A single S4 four-piston caliper clamps a 12 inch one-piece slotted, drilled and zinc-plated rotor. The backing plate both mounts the caliper and houses a one-piece park brake shoe assembly. The 12 inch SS4 fits most wheels of 16 inch or larger.
Key features
- Single S4 caliper with four pistons, CNC machined from US sourced forged or billet aluminum
- Powder coated silver finish
- Hard anodized pistons ride on stainless steel abutments with noise suppression clips
- Dual seals handle dust, weather and pressure
- One-piece slotted, drilled and zinc-plated rotor, 12 inch outside diameter
- Backing plate houses a one-piece park brake shoe assembly
- Steel braided brake hoses, DOT approved, included
- Baer recommends the S113E template to check a wheel before fitting
Park brake and rear axle care
A rear park brake shares the backing plate with the service brake, so its shoes and adjusters need periodic attention along with the caliper and rotor. Park brake shoes wear more slowly than service pads, but they still lose lining over time and can stop holding if the adjuster is neglected. Checking the parking brake hold on a slope after a few hundred miles of driving gives an early sign of wear.
Rear axle work on a small bearing housing end involves the bearing, seal and hub as well as the brake parts. Any time the brake is opened, inspect the axle seal for leaks and check bearing play before refitting the rotor. Clean the backing plate of debris so the shoe assembly moves freely, and avoid getting grease or fluid on the rotor face.
- Inspect park brake shoes and adjuster during each service
- Replace braided hoses that show cracking or chafing
- Check for fluid leaks at the caliper and hose fittings
- Recheck wheel clearance after changing wheel offset
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262654S |
| UPC | 844165038740 |
| Sold as | Kit |
| Caliper | S4, four-piston, fixed, silver |
| Caliper quantity | 1 |
| Rotor outside diameter | 12.0 inch |
| Rotor type | One-piece, vented, slotted, drilled and zinc plated |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Pad type | DR1-C (FMSI) |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables included | No |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Wheel bolt pattern | 5 lug, 5×5.00 |
| Minimum wheel diameter | 16.0 inch |
| Template | S113E |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
The kit matches Ford 8 inch and 9 inch small bearing housing rear ends with a 5×5.00 bolt pattern, so the axle-side fit is the first check. Confirm your vehicle’s year, model and trim before ordering.
Baer cannot guarantee fit with every wheel style, so use the S113E template against your wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so cable routing has to be planned separately. Braided hoses come with the kit. Test wheel clearance with the S113E template before mounting, and have park brake and hydraulic work on rear axles handled by an experienced installer.
What’s included
One S4 four-piston caliper, the backing plate with its one-piece park brake shoe assembly, a one-piece 12 inch rotor, and steel braided hoses.
Not included: park brake cables, lug nuts and a front rotor.















