Select your vehicle

Baer Brakes SS4 Plus Deep Stage Rear-Rear Ends W/Ford 9 Inch Small Bearing Housing Ends (5X4.5 Inch 5X4.75 Inch BC) Clear – 4262324C

Baer Brakes

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Clear drag race rear brake kit with two S4 calipers for Ford 9 inch Small Bearing ends
  • Two 1.75 inch piston calipers and 11.0 inch two-piece slotted, drilled rotors
  • Ships with high friction drag race pads; 5×4.50/5×4.75 bolt pattern
  • Drilled billet aluminum hats for 5/8 inch wheel studs; hoses not included
  • Axle flange text states 5.75 inch; confirm before ordering

Description

Overview

The Baer Brakes 4262324C is a clear-finish rear drag race brake kit from the SS4 Plus Deep Stage line, intended for Ford 9 inch rear ends that use Small Bearing housing ends. Two four-piston S4 calipers, each carrying 1.75 inch pistons, squeeze 11.0 inch two-piece rotors on a 5 on 4.50 or 5 on 4.75 bolt pattern. The system is sized for 15 inch and larger wheels, with a minimum wheel diameter of 15.0 inch.

The Deep Stage is designed as a drag race system for heavy, fast cars that may also be driven on the street. The kit includes high friction pads made for drag use, with a DR1 FMSI pad number and semi-metallic friction material. Brake hoses are not included, and the axle flange must measure 5.75 inch, so check that before ordering.

Key features

  • Two S4 calipers with four pistons each, manufactured in Phoenix, Az
  • Two 1.75 inch pistons per caliper, hard anodized aluminum with stainless steel abutments
  • Smaller drag system that keeps the benefits of the larger SS4 Plus brakes
  • Two-piece slotted, drilled, zinc-plated vented rotor
  • Billet aluminum hats drilled for 5/8 inch wheel studs
  • Powder coated finish with noise suppression clips
  • High friction pads designed for drag race applications, DR1 FMSI number

Choosing drag pads

High friction pads trade comfort for grip. They generally produce more noise and dust than street pads, and they can feel grabby when cold. Before choosing a drag setup, consider how the car will be driven most often, since a pad built for the strip may be a poor match for daily commuting or long highway runs.

Pad and rotor pairs are usually replaced together. A worn rotor face can glaze a fresh pad, and a glazed pad loses bite even when the caliper is in good shape. Inspect the rotor surface for heavy scoring, cracks and thin spots each time the pads are changed, and resurface or replace parts that no longer run true.

Brake fluid also matters in this setup. Hot drag runs can boil old fluid, so change it on a regular schedule and bleed the system after any caliper or hose work to keep the pedal firm.

  • Match pad choice to how the car is driven
  • Replace pads and rotors as a pair when wear is uneven
  • Refresh brake fluid on a regular schedule

Specifications

Brand Baer Brakes
Part number 4262324C
UPC 844165038467
Caliper S4, four-piston, fixed
Calipers included 2
Piston size 1.75 inch
Caliper color Clear
Rotor outside diameter 11.0 inch
Rotor thickness 1.02 inch
Rotor construction Vented, two-piece
Rotor surface Slotted, drilled and zinc plated
Hat Billet aluminum, drilled for 5/8 inch wheel studs
Pad FMSI number DR1
Friction material Semi-metallic
Minimum wheel diameter 15.0 inch
Lug count 5 lug
Bolt pattern 5×4.50/5×4.75
Axle flange Ford 9 inch Small Bearing
Brake hoses Not included
Park brake No
Sold as Kit
Country of origin US

Vehicle fitment

It is matched to Ford 9 inch axles with Small Bearing housing ends. Verify your housing ends and the 5.75 inch flange before purchase, and confirm your vehicle’s year, model and trim before ordering.

Torino (Late Big) bearing housing ends are a different flange style and are outside this kit. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Drag race installation calls for professional setup and alignment of the calipers to the rotors. Brake hoses are not supplied, so match new lines to the S4 calipers and your routing. Bleed the system fully and allow the high friction pads to seat before aggressive use.

What’s included

Two clear S4 calipers with 1.75 inch pistons, two-piece rotors pre-assembled with stainless hardware, high friction drag race pads, mounting hardware and billet aluminum hats.

Not included: brake hoses, lug nuts, park brake.

Specification

Shipping weight 48 lbs
Package dimensions 15 × 8 × 15 in
brands

Sold as

Kit

Wheel bolt pattern (in)

5×4.50/5×4.75

Lug nuts

5 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

No

Lug nuts included

No

Axle housing flange type

Small Bearing

Country of origin

US

Questions & Answers

What is the Baer Brakes 4262324C?

It is a clear rear drag race brake kit from the SS4 Plus Deep Stage line, part number 4262324C. It has two S4 calipers with 1.75 inch pistons and 11.0 inch two-piece rotors, built for Ford 9 inch Small Bearing ends.

Will it fit a Torino bearing housing end?

No. The kit is matched to Ford 9 inch Small Bearing housing ends. The Torino (Late Big) bearing style uses a different flange, so confirm your axle type before ordering.

Does the kit include brake hoses?

No. Brake hoses are not part of the kit. Mounting hardware and rotors pre-assembled with stainless hardware are included, so plan to source brake lines that match the S4 calipers and your routing.

What pads come with the kit?

The kit includes high friction pads designed for drag race applications. The pad FMSI number is DR1, and the friction material is semi-metallic.

Can the high friction pads be used for street driving?

They can be driven on the street, but they are designed for drag race applications, so expect more noise, dust and a firmer bite when cold. Pads that run hot and heavy may need time to bed in before daily use. Check pad feel before committing to a street setup.

How often should drag brake pads be replaced?

Replace them when the friction material is worn to the backing or the surface shows heavy cracking, glazing or uneven wear. Frequency depends on track time, vehicle weight and how hard the car is run. Inspect the pads and rotors after each event for scoring or lip wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon