Select your vehicle

Baer Brakes Pro Plus Brake System Rear Rear Ends W/Ford 9 Inch Early Big Bearing Housing Ends (5X5.00 Inch BC) Black – 4262186B

Baer Brakes

$2,698.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 2:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits Ford 9 Inch early big bearing rear axle housing ends with a 5×5.00 inch bolt pattern (no vehicle years listed)
  • Black six-piston fixed caliper with a two-piece 13.0 inch slotted, drilled rotor
  • Minimum wheel diameter 17.0 inch; park brake shoe assembly included in the backing plate
  • Lug nuts, front rotor and park brake cables are not included

Description

Overview

The Baer Brakes Pro Plus 4262186B is a black rear brake kit built for Ford 9 Inch early big bearing axle housings that use a 5×5.00 inch wheel bolt pattern. Each kit centers on a six-piston fixed caliper in black and a two-piece 13.0 inch slotted, drilled rotor with a zinc-plated surface.

The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so the parking brake hardware is packaged into the same rear assembly. The kit fits most wheels 17 inches or larger, but clearance with every aftermarket wheel cannot be guaranteed. Compare the Q082H template to your wheel before installing.

Key features

  • Black powder-coated six-piston fixed caliper (6P)
  • Two-piece slotted, drilled and zinc-plated 13.0 inch rotor
  • Billet aluminum hat mounted on an iron rotor
  • Stainless steel pistons, abutments and noise suppression clips
  • Staggered pistons aimed at reducing uneven pad wear
  • Dual seals rated for dust, weather and pressure
  • Park brake shoe assembly housed inside the backing plate
  • DOT approved steel braided hoses.

Choosing rear brake hardware

Rear brake hardware takes the most work when a vehicle carries extra weight or runs off road, because the rear axle housing and rotor absorb heat from repeated stops and long trail descents. A kit that combines the caliper, rotor and park brake shoe assembly means the parking function is serviced alongside the service brakes, so inspect it during every brake job rather than treating it as a separate system.

When choosing a setup, match the axle flange and bolt pattern first, then check wheel clearance against the rotor and caliper envelope. Pads, hoses and fluid are commonly replaced in the same job, and worn hoses or old fluid can change pedal feel more than a worn rotor does.

  • Check rotor edges for lipping or scoring
  • Inspect park brake shoes for wear at each service
  • Look for seeping or cracked hoses before reassembly

Specifications

Brand Baer Brakes
Part number 4262186B
UPC 844165036975
Sold as Kit
Caliper Six-piston (6P) fixed, black
Rotor outside diameter 13.0 inch
Rotor thickness 1.1
Rotor type Two-piece, vented
Rotor material Iron with aluminum hat
Surface Slotted, drilled and zinc plated
Wheel bolt pattern 5×5.00 inch, 5 lug
Minimum wheel diameter 17.0 inch
Axle flange Ford 9 Inch early big bearing
Brake pad FMSI number D0731
Hose material Steel braided, DOT approved
Template Q082H
Park brake Included in backing plate (one-piece shoe assembly)
Country of origin US

Vehicle fitment

The kit matches Ford 9 Inch early big bearing axle housing ends with a 5×5.00 inch bolt pattern, so the rear axle housing determines whether it fits a given truck. Confirm fit for your vehicle’s year, model and trim before ordering.

Compare the flange on your axle with the early big bearing description before anything else. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Lug nuts, the front rotor and park brake cables sit outside this package, so they need to be sourced before the rear work begins. The 13.0 inch rotor fits wheels of 17.0 inch minimum diameter, and the Q082H template is the check Baer recommends. Caliper and hose work on a rear axle should be handled by someone comfortable with brake hydraulics.

What’s included

Included: the 13.0 inch rear rotor, the six-piston caliper, the backing plate with its park brake shoe assembly, stainless braided hoses, and the pre-assembled stainless hardware.

Not included: lug nuts, the front rotor and the park brake cables.

Specification

Shipping weight 69 lbs
Package dimensions 15 × 15 × 15 in
brands

Sold as

Kit

Wheel bolt pattern (in)

5×5.00

Lug nuts

5 Lug

Rotor type

2-Piece

Rotor style

Slotted, Drilled

Rotor construction

2-Piece

Rotor material

Iron w/Aluminum Hat

Front rotor included

No

Park brake

Yes

Lug nuts included

No

Axle housing flange type

Big Bearing

Country of origin

US

Questions & Answers

Is the 4262186B the same kit as the red version?

The black 4262186B and red 4262186R list the same core specifications, including the 13.0 inch rotor, six-piston caliper and Ford 9 Inch early big bearing flange. The listed difference is the caliper color, which is black on this part.

What rotor size and bolt pattern does this black kit use?

It uses a two-piece 13.0 inch rotor and a 5x5.00 inch wheel bolt pattern with 5 lug. The rotor is slotted, drilled and zinc plated, with an iron body and aluminum hat.

Which parts are missing from this package?

The package does not include lug nuts, the front rotor or the park brake cables. The park brake shoe assembly is housed inside the backing plate and is part of the kit.

Does Baer list vehicle years for this kit?

The kit is matched by the Ford 9 Inch early big bearing axle flange rather than by vehicle year, make or model. Confirm fit for your vehicle's year, model and trim before ordering, and check that flange on your axle before installing.

How can I tell when the rear rotors need replacing?

Look for deep scoring, lipping at the rotor edge, uneven thickness or pulsation under braking. Measure thickness against the minimum thickness marked on the rotor or in the service manual before reusing it.

Should the brake pads be replaced along with the kit?

Often yes, because new rotors wear in best against fresh pads, and worn pads can score a new rotor. Check pad thickness and confirm the pad type with the FMSI number on the package before installing.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon