Overview
Baer Brakes’ Extreme Plus rear brake system in Hugger Orange, part number 4262691HO, is a rear disc brake kit for the 09-11 Ford F150 and the 10-11 Ford Raptor. It suits 2WD and 4WD trucks that use six-lug wheels on a 6x135mm bolt pattern.
The heart of the kit is a one-piece Monoblock 6-piston caliper, designated 6S, that squeezes a 15-inch two-piece rotor. The backing plate carries the caliper and holds a one-piece park brake shoe assembly, so service braking and parking share one bracket. The caliper is CNC machined from US-sourced 2618 aluminum forging in Phoenix, Arizona.
Key features
- One-piece Monoblock 6-piston 6S caliper with a powder coated finish
- Caliper body machined from US-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual seals guard against dust, weather and hydraulic pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Rotors arrive pre-assembled with NAS high grade stainless hardware
Bedding in new brakes
New pads and rotors need a bedding procedure before they reach full stopping power. A series of moderate stops from speed lays an even transfer layer on the rotor face, which keeps braking smooth and quiet. Avoid holding the pedal down at a stop right after bedding, since heat can leave pad material on the rotor in uneven patches.
After bedding, watch for pulsation, squeal or a spongy pedal. Those symptoms usually point to rotor runout, contaminated pads or air in the lines rather than a fault in the caliper itself. Bleeding the hydraulic lines after any hose work, and checking lug nut torque, are simple steps that prevent many early complaints.
- Bed in pads on a quiet road before heavy use
- Keep brake fluid fresh to resist heat fade
- Check lug nut torque after the first few stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262691HO |
| UPC | 90127941966 |
| Caliper | 6S, one-piece Monoblock, 6 pistons, floating |
| Caliper color | Hugger Orange |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented, slotted, drilled, zinc plated |
| Rotor hat | Billet aluminum |
| Pad type | D1247 FMSI |
| Template | N125U |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Minimum wheel diameter | 19.0 inch |
| Drive | 2WD, 4WD |
| Park brake | Included, one-piece shoe assembly in backing plate |
| Park brake cables | Re-uses OE |
| Hoses | Re-uses OE hoses |
| Grade | Performance |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
The kit fits the 2009–2011 Ford F-150, and its application also covers the Ford Raptor 10-11, in 2WD and 4WD trucks.
Other Ford models and F-150 years outside the 09-11 range are not part of these applications. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit works with the truck’s existing park brake cables and hydraulic hoses, so check those parts for wear before the Hugger Orange caliper goes on. Because the 15-inch rotor suits wheels of 19 inches or larger, Baer recommends comparing the N125U template against your wheel before mounting. Test the park brake and pedal feel before driving, and bleed the hydraulic lines after the first fit.
What’s included
The kit includes the 6S Monoblock caliper, the 15-inch two-piece rotors with billet aluminum hats, the backing plate with its park brake shoe assembly, and the brackets and hardware.
Not included: the truck’s own park brake cables and hoses, which the kit reuses rather than replaces.
