Overview
The Baer Brakes 4262259CY is a complete SS4 rear brake system kit in Comp Yellow for rear axles with a Ford 9 Inch Early Big Bearing axle flange and a 5×4.50/5×4.75 five-lug bolt pattern. It pairs a four-piston fixed S4 caliper with a 12 inch, one-piece, vented rotor that is slotted, drilled and zinc plated, so it is a rear disc brake upgrade for those axles. No specific vehicles are named for this kit.
The pads used are DR1 or HB100 types, and the FMSI number is DR1-C. The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, which keeps a parking brake function at the rear. Check the wheel and template before assembly, because fit across all wheel styles cannot be assumed.
Key features
- Four-piston S4 caliper with a fixed design
- One-piece 12.0 inch vented rotor, slotted, drilled and zinc plated
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual dust, weather and pressure seals
- CNC machined from US-sourced forged or billet aluminum
- Park brake shoe assembly housed in the backing plate
- Braided hoses included
Choosing the right setup
Rear disc upgrades change more than the stopping hardware. A bigger rotor and multi-piston caliper alter the load on the axle flange, the hub and the wheel bearings, so the rest of the rear end should be inspected whenever the system is installed. Before buying, measure your current wheel offset and backspacing and confirm the new rotor and caliper clear the wheel face. Pad choice matters too: a performance compound suits trail and street use, while a softer pad can suit lighter driving.
Parking brake function depends on the shoe assembly and cable routing, so check cable length and clearance against the axle housing and suspension before final assembly. Brake lines should never contact moving parts. After the first few drives, re-check lug torque and inspect the rotor surface for heat cracks or uneven wear.
- Measure wheel backspacing before ordering
- Inspect the axle flange for wear at each service
- Replace worn pads and rotors together
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262259CY |
| UPC | 90127949078 |
| Caliper | S4 |
| Caliper color | Comp Yellow |
| Caliper type | Fixed |
| Piston quantity | 4 |
| Rotor outside diameter | 12.0 inch |
| Rotor construction | Vented, one-piece |
| Rotor thickness | 1.02 |
| Surface type | Slotted, drilled and zinc plated |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 16.0 inch |
| Pad FMSI number | DR1-C |
| Brake hose DOT approved | Yes |
| Includes park brake | Yes |
| Includes park brake cables | No |
| Template | S113E |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | USA |
Vehicle fitment
The kit is built for rear axles with a Ford 9 Inch Early Big Bearing flange, which identifies the axle type rather than a model year or trim. Match the rear end to your vehicle’s year, model and trim before buying.
Use the S113E template to check that your wheel clears the 12 inch rotor and caliper. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The minimum wheel diameter is 16.0 inch, so wheels smaller than that fall outside the kit’s specification. Braided hoses and the park brake shoe assembly are included, while park brake cables are not, so confirm cable routing for your axle before assembly. Work on rear disc and parking brake hardware is best left to someone experienced with this type of system.
What’s included
The kit includes the S4 caliper, the 12 inch one-piece rotor, the backing plate with its park brake shoe assembly, and braided hoses.
Not included: park brake cables.















