Overview
The Baer Brakes 4301388B is a black Pro Plus front brake system aimed at Chevrolet C10 and GMC C15 trucks built between 1960 and 1986. It suits two-wheel-drive half-ton models that carry a 2.5 inch drop modular spindle, and it pairs a six-piston caliper with a 14 inch rotor.
The complete front set is sold under one number. The billet hubs come with bearings, the rotors are assembled with stainless hardware, and braided hoses are included. Not every aftermarket wheel will clear the caliper, so check wheel fit with the template before mounting.
Key features
- Six-piston fixed caliper with a staggered piston layout to limit uneven pad wear
- Dual dust, weather and pressure seals on the caliper
- Stainless pistons, abutments and noise suppression clips
- Two-piece zinc plated rotor with billet aluminum hat, slotted and drilled
- Billet aluminum hubs with premium bearings and billet dust caps
- CNC machined from US-sourced forged or billet aluminum with a powder coated finish
- Steel braided hoses, DOT approved
Trail use and clearance
Off-road driving puts more load on the front brakes than road driving does, especially on long descents. Mud, sand and rock debris can get into the caliper area and the hub, so a periodic check of the rotor face and the pad backing plates is worth doing after each trip.
A dropped front end also changes the angle of the steering and suspension components. Check that the braided hoses have enough slack through full steering travel and suspension compression, and that they do not rub on the spindle or control arms.
- Rinse mud from the caliper and hub after trail use
- Check hose slack at full steering lock
- Inspect pad thickness before long descents
- Look for rotor scoring from grit
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301388B |
| UPC | 844165040743 |
| Caliper color | Black |
| Caliper | 6-piston fixed (6P) |
| Rotor diameter | 14 inch |
| Rotor thickness | 1.15 |
| Rotor construction | 2-piece slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI | D0731 |
| Template | Q117P |
| Wheel bolt pattern | 5×5.00 inch |
| Lug count | 5 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 18 inch |
| Hose material | Steel braided |
| Spindle type | Cpp nodular iron 2.5 inch drop |
| Grade | Performance |
| Emission code | 6 |
Vehicle fitment
It fits 1960–1986 Chevrolet C10, 1967–1986 Chevrolet C10 Suburban, 1960–1966 and 1987–1989 Chevrolet Suburban, 1966 GMC 1000, 1960–1965 GMC 1000 Series, 1975–1978 GMC C15, 1967–1974 GMC C15/C1500 and 1979–1986 GMC C1500. Pickups from 1987–1989 other than the Suburban and later C/K trucks are outside this range. Confirm fit for your vehicle’s year, model and trim before ordering.
Outside the list: 1987–1989 pickups other than the Suburban, and later C/K trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs mount to 2.5 inch drop spindles that are not supplied, so confirm your spindles are the Cpp nodular iron 2.5 inch drop type. Use template Q117P to check clearance against the wheel you intend to run.
What’s included
Front rotors with stainless hardware, billet aluminum hubs with bearings, mounting brackets, stainless braided hoses and hardware.
Not included: drop spindles and lug nuts.














