Overview
Part 4262264B from Baer Brakes is a black SS4 rear kit covering Ford 9 inch axles with Torino (late big) bearing housing ends. Inside is an S4 4-piston caliper paired with a 12.0 inch slotted, drilled and zinc-plated 1-piece rotor on a 5×5.00 bolt pattern.
The backing plate holds the caliper and a modern 1-piece park brake shoe assembly, which is why the kit works as a complete rear package. Fit depends on the wheel style, so check the S113E template against the wheel you plan to use. The kit suits most 16 inch or larger wheels.
Key features
- Four-piston S4 caliper with 2-piece construction, manufactured in Phoenix, AZ.
- Body CNC machined from forged or billet aluminum of U.S. sourcing.
- Black powder coated finish.
- Hard anodized pistons, stainless steel abutments and noise suppression clips.
- Dual seals for dust, weather and pressure.
- 1-piece slotted, drilled and zinc-plated rotor.
- Braided hoses that are DOT approved.
Pads, rotors and wheel clearance
Pad choice affects braking feel, heat and dust, so match the pad to how the vehicle is driven. Heavier loads and steep grades put more heat into the rotor, which is when glazing and uneven wear show up first. Keep the pad surfaces clean and check the backing shims during every brake service.
Wheel clearance around a rear caliper is tight on many setups, so test fit the wheel before mounting tires. Rotors that run hot or develop a blue tint should be inspected for warping. Replace any rotor that is worn beyond its minimum thickness rather than trying to stretch its service life.
- Test fit the wheel before mounting tires
- Inspect rotors for blue tint or warping
- Replace pads in sets and bed them in gently
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262264B |
| UPC | 844165028550 |
| Sold as | Kit |
| Caliper | S4, 4 pistons, fixed, black |
| Pad FMSI number | DR1-C |
| Template | S113E |
| Axle | Rear, Ford 9 Inch Torino/Late Big Bearing flange |
| Rotor outside diameter | 12.0 Inch |
| Rotor thickness | 1.02 |
| Rotor construction | 1-piece, vented, slotted, drilled, zinc plated, iron |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Minimum wheel diameter | 16.0 Inch |
| Park brake | Shoe assembly included; park brake cables not included |
| Brake hose | DOT approved, braided |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Fitment is based on the axle: a Ford 9 inch rear end with Torino (late big) bearing housing ends. Confirm the model years that run that axle style before ordering.
Ford 9 inch axles with other flange styles need a separate check. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for separate park brake cables, since they are not part of the package. Front rotors and lug nuts are also excluded. After the braided hoses are fitted, the brake system needs a complete bleed before the first drive, and a qualified brake technician should check the rear setup.
What’s included
Inside the box: the black S4 caliper, the 12.0 inch rotor, the backing plate with park brake shoe assembly, and braided hoses.
Not included: Park brake cables, the front rotor and lug nuts.















