Overview
The Baer Brakes 4141022GB is a Grabber Blue front brake system for Dodge and Ram 1500 trucks, built around a 1-piece Monoblock, 6-piston 6S caliper. Its 15 inch rotor is two-piece, slotted, drilled and zinc plated, and the full set carries one part number for the front axle.
It fits 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic. The 19-24 fitment note covers the Classic Body. The kit uses the popular D1247 pad type, and the grade is Performance.
Key features
- Monoblock caliper with six pistons, designated 6S, made in Phoenix, Az
- Caliper body CNC machined from US-sourced 2618 aluminum forging
- Powder coated finish in Grabber Blue
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat
Bleeding and hose checks
Once the caliper and rotor are mounted, the hydraulic side needs attention before the truck is driven. Air in the lines makes the pedal feel soft, so bleed the system in the correct order and keep the reservoir topped off during the process. Pressure bleeding or a helper working the pedal both work well, as long as the fluid is fresh and matches the type specified on the reservoir cap.
Because the factory hoses stay in use, inspect them closely at the same time. Look for bulges, cracked rubber near the fittings, and any seepage at the banjo bolts. Replace a hose that shows any of these signs rather than hoping it holds. Bed in the new pads with a series of moderate stops before any hard braking, so the friction surfaces transfer an even layer.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4141022GB |
| UPC | 90127939437 |
| Axle | Front |
| Caliper | 1-piece Monoblock, 6S |
| Caliper piston quantity | 6 |
| Caliper type | Fixed |
| Caliper color | Grabber Blue |
| Caliper body material | 2618 aluminum forging, CNC machined |
| Piston material | Stainless steel |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor construction | Vented |
| Rotor type | 2-Piece |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor hat | Billet aluminum |
| Pad type (FMSI) | D1247 |
| Template | N118U |
| Minimum wheel diameter | 19.0 inch |
| Wheel bolt pattern | 5×139.7mm |
| Lug count | 5 lug |
| Hose material | Re-uses OE hoses |
| Grade | Performance |
| Country of origin | USA |
Vehicle fitment
Vehicles it fits are 2002–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic trucks, with the Classic Body covered by the 19-24 note.
Only Ram 1500 models are on the list, so Ram 2500 and 3500 trucks are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each rotor is supplied pre-assembled and fastened with NAS high grade stainless hardware, and every mounting bracket and fastener is included. The factory hoses stay in use because the kit re-uses OE hoses. Check clearance with template N118U before mounting, since wheel styles differ. The minimum wheel diameter is 19.0 inch.
Brake components should be fitted by an experienced technician.
What’s included
The kit includes the Grabber Blue 6S caliper, the 2-piece rotor already assembled, and all brackets and hardware needed to mount them.
Not included: Brake pads. The kit is built for the D1247 pad type, and pads are not part of the set.
