Overview
The Baer Brakes 4261559B is an 11.9-inch front rotor kit with a black caliper color, made for Ford Bronco wheels 16 inches or larger. It fits the 1966–1975 Ford Bronco in Custom, Northland, Ranger and Sport trims, with a 5×5.50 wheel bolt pattern.
Each rotor comes pre-assembled in a kit with dust and weather seals and NAS hardware. The design is intended for off-road use, and the Pro+ front setup applies to stock drum spindles only.
Key features
- Straight bolt-on fit on a 5×5.50 wheel pattern
- Dust and weather seals come with the kit
- NAS hardware supplied for assembly
- Pre-assembled directional rotors
- Off-road oriented design
- Corvette C5 and C6 pads make pad changes easier
- Rotor surface SDZ with an 11.9-inch rotor diameter
Before you buy
Larger wheels leave less room around the brake assembly, so measure clearance between the caliper and the wheel before buying. Wheel offset and tire width both change how close the caliper sits to the inner barrel. A rotor kit only performs well when the rest of the wheel setup leaves enough room for it.
Caliper color is a finish choice and does not change how the brakes work, so spend your attention on what matters for trail use. Pad compound, fluid rating and hose condition have a bigger effect on feel. Rubber hoses can swell or crack with heat and age, so inspect them before a trip and replace any that bulge.
- Measure caliper clearance with the wheels you plan to run
- Match pad compound to how you drive
- Inspect the rotor hat and bolts after the first drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261559B |
| UPC | 844165054214 |
| Package type | Kit |
| Rotor diameter | 11.9 inches |
| Minimum wheel diameter | 16.0 inches |
| Wheel bolt pattern | 5×5.50 |
| Caliper | 6P |
| Caliper color | Black |
| Rotor surface | SDZ |
| Template | Q040E |
| Axle | Front |
| Brake hoses | Not included |
| Country of origin | USA |
Vehicle fitment
The manufacturer fitment list covers the 1966–1975 Ford Bronco in Custom, Northland, Ranger and Sport trims.
Not covered: the 1976–1977 Ford Bronco and other Ford models outside the listed range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the vehicle has stock drum spindles, since the Pro+ front setup is limited to them. Brake hoses are excluded, so verify existing hoses before work begins. Pad and rotor replacement needs a jack, stands and proper torque tools, and an experienced mechanic should inspect the completed brakes.
What’s included
The black-caliper rotor kit with dust and weather seals, NAS hardware and pre-assembled rotors.
Not included: brake hoses.
