Overview
The Baer Brakes 4262150MG is a Pro Plus 14.0 inch rear brake system in Monster Green for Ford 8 inch/9 inch small bearing housing ends. A six-piston fixed caliper works with a 2-piece slotted, drilled and zinc plated rotor, and the minimum wheel diameter is 18.0 inch.
The backing plate acts as the caliper mount and also holds a modern one-piece park brake shoe assembly. Rotors are pre-assembled with stainless hardware, and stainless braided hoses are part of the set.
Key features
- Six-piston fixed caliper finished in Monster Green with a powder coated surface
- Caliper manufactured in Phoenix, Arizona from CNC machined U.S.-sourced forged or billet aluminum
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons aimed at reducing uneven pad wear
- Dual seals against dust, weather and pressure
- 2-piece slotted, drilled, zinc plated rotor with billet aluminum hat
- Braided steel hoses, DOT approved, with stainless hardware
Park brake service
The park brake shoes inside the backing plate work as a secondary hold, and they need periodic checks. Over time the shoe lining can glaze, and the adjuster can drift, so the lever travel becomes longer than it should be. Adjusting the shoes to the rotor after the first few drives keeps the system working as designed.
Because cables are not part of this set, the condition of the existing cables matters. Look for frayed sheathing, stiff movement, or seized ends at the backing plate. Lubricating the cable pivots and replacing a seized cable during the same job avoids a second trip under the vehicle.
- Test the hold on a slight incline before each season of use
- Check the adjuster for free movement
- Inspect the cable ends where they meet the backing plate
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262150MG |
| UPC | 90127947326 |
| Sold as | Kit |
| Caliper | 6-piston (6P), fixed, rear |
| Caliper color | Monster Green |
| Rotor outside diameter (rear) | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor construction | 2-piece, vented, slotted, drilled, zinc plated |
| Pad FMSI number | D0731 |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included; park brake cables not included |
| Grade | Performance |
| Template | Q082P |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The kit is built for Ford 8 inch/9 inch small bearing housing ends with a 5×4.50/5×4.75 bolt pattern and 5 lug count. Fitment follows the axle, so confirm your axle before ordering.
Fit is not guaranteed for every wheel style, so compare the Q082P template to your wheel. Check the year, model and trim of your vehicle against the kit before ordering.
Installation notes
Park brake cables are absent from this set, so reuse the cables already on the vehicle or buy them separately. Measure wheel clearance against the 14.0 inch rotor, keeping in mind the 18.0 inch minimum wheel diameter. Once the braided hoses are routed, a brake technician should bleed the lines.
What’s included
Monster Green calipers, 2-piece rotors with stainless hardware already fitted, the backing plate and park brake shoe assembly, and steel braided hoses.
Not included: park brake cables.
